1 / 17
Toy Balloon Hovercraft Disc - Air Inflator included
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A hover disc uses an air lock inflator to fill a balloon. Attach the inflator to the disc to release air, creating a hov
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 93
- Makes
- 2
- Views
- 376
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
To see how it works check out this video:
The printing requires no special precautions, it works great with PLA. The inflator is best printed with the thick part on the plate. No support required.
Please note the following tips:
- Use the hover disc on a smooth surface (table, parquet floor, something without large elevations)
After you've printed the valve, move the inner part a few times and blow out dust form both sides. if it still not sealing well, use your swiss army knife (screwdriver) to rotate the inner part a few times.