Counting matching models…
Introducing my new hovercraft print, powered by a balloon! This model is made up of two parts: the hovercraft itself and a screw with the balloon attached (you need a ballon). To inflate the balloon, simply blow it up through the screw.…
Hovercraft compatible with standard Lego or Lego Duplo bricks Complete your Lego or Lego Duplo collection with a new vehicle - a hovercraft! And print a cute toy for your children's - for example to make regular bath visits more fun :)…
A simple balloon driven hovercraft, with large lip on the balloon tube to hold the balloon more securely. #Edit# I've started tweaking this in various ways. Version 2 now has separate directional fins that can be pressed in and aligned to…
The Hovering Disk is a 3d printed device, which demonstrates almost frictionless motion. The air coming from the balloon is moving through a small whole to the bottom of the disk. At the bottom it is distributed all-over to all sides.…
This 3D model of a cup of noodles with chopsticks suspended in mid-air was a project I’ve been wanting to bring to life for quite some time. Featuring a design with four distinct colours, the painting process was a bit time-consuming but…
Deutsch: Einfacher Tiny Whoov, es sind keine stützstrukturen nötig. Alles kann einfach zusammengesteckt werden, ohne kleben oder schrauben. English: Simple Tiny Whoov, no supports are needed. Everything can be simply put together, without…
this is a revision from my HoverWhoop -smaller and lighter -angled downward motors for more speed and centralized downward trust -accept both inductrix stick and eachine square battery Print Settings Printer Brand: FlashForge Printer:…
repurpose your old inductrix/e010 board to a fpv drifting hovercraft Print Settings Printer Brand: FlashForge Printer: Creator Pro Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 50 Post-Printing motor_holder.stl x2…
TAIYO EDGE R/C HOVERCRAFT propeller blade replacement
Bumber stehend auf der geschlossenen / runden Fläche, kein Support erforderlich. Die Ruder ebenfalls stehend, kein Support erforderlich. PLA ist ausreichend, DRAFT oder SPEED.
adapter hub for turning a hoverboard motor into a windmill. the blades i used are from a whisper 200 or something like that but any blades could be adapted for this use. barely fits my 250x250 printer. enjoy! i added a 12 degree pitch…
We made a hovercraft this week. It rides on a freezer bag. I made a video about it: https://youtu.be/0irGeS4ChFQ
I recomment a 0.2 nozzle for printing. If you want more content for Dominate & Delegate take a look at: https://dominate-and-delegate.com/en/downloads-materials Check also my collection:…
I made Hula inspired feet for my machine, but it can be adapted to be used on onther machines as I included a step file for easier design. I user 6mm steel balls for rolling, PETG for the structural parts and TPU for the damper and the…
This model holds the VTX antenna for the Xhover Gapit frame, i also designed this part to have a zip tie that retains the main power cable, I recomend printing this out of TPU or Nylon (This part was printed in CF Nylon ONYX)
This 3D model of a cup of noodles with chopsticks suspended in mid-air was a project I’ve been wanting to bring to life for quite some time. Featuring a design with four distinct colours, the painting process was a bit time-consuming but…
To see how it works check out this video: The printing requires no special precautions, it works great with PLA. The inflator is best printed with the thick part on the plate. No support required. Please note the following tips: Use the…
We made a hovercraft this week. It rides on a freezer bag. I made a video about it: https://youtu.be/0irGeS4ChFQ
DirectForce Wheel 🏎 📄 Description DIY Direct Drive steering wheel, powered by a hoverboard motor! This project includes a fully 3D printable enclosure, essential mounting parts, components list and a build guide, ensuring a solid and…
I used 2 40a 4s escs with 2 5 inch fpv drone motors for power, along with a small servo for steering and a pwm reciever. The skirt is made from a trash bag and attached with duct tape, and it needs weight on the back to balance out the…
I designed this model to be large enough to work on multiple surfaces and transitions(grass, water, pavement, etc.) The hovercraft floats on water when the motors are off, thanks to the foam bumper and float assembly in the hull. Vapor…
If you appreciate my work and like it, you can buy me a coffee ;) but this is absolutely not expected. Short introduction: The alignment of the magnet and encoder is the most critical factor for the mechanical precision of the steering…
bottom part should be 100% or at least the motor mount part back and front are the same as the original model
If you appreciate my work and like it, you can buy me a coffee ;) but this is absolutely not expected. Short introduction: This design is created for 6,5" hoverboard motor with magnetic encoder. At the beginning wheelbase was build around…
This model is compatible with the lego system.
This model is compatible with the lego system.
It's a truck hovering truck you can play with.
This is a low detailed model of the SNR4 Hovercraft. The SNR4 was a type of hovercraft developed by Hovercraft Development Ltd (HDL) in the United Kingdom during the 1960s. It was designed primarily for commercial ferry use, particularly…
Made by jalixyt on youtube and tiktok for carbon 13 Dummy 13 Lucky13 DOESN'T SCALE WELL WITH MINI 13
Hovercraft compatible with standard Lego or Lego Duplo bricks Complete your Lego or Lego Duplo collection with a new vehicle - a hovercraft! And print a cute toy for your children's - for example to make regular bath visits more fun :)…
This model can work with no adhesion and supports but will work better with it.
I didn't like that I couldn't steer the original machine without it moving forward. I made these parts to fit the existing base and used a VTail mixer to get them to work properly together. With this setup I can spin 360 degrees with…
This project creates a fully functional RC hovercraft that glides over various surfaces , powered by electric motors and controlled via a standard RC transmitter . You can find the assembly guide in files. more at my Github . 1 main_body:…
There are two different solutions here, a geared solution and a belted solution The gear solution worked well for me originally but turns out my motor wasn't fully concentric so the gears would fail to mesh and lose encoder steps causing…
This is a disc brake caliper holder I used on the electric car I build for my kids. You can read more about this project here: https://www.martinsentech.no/index.php/2023/10/12/electric-pedal-car-for-kids/
This is a axle holder I used on the electric car I build for my kids. You can read more about this project here: https://www.martinsentech.no/index.php/2023/10/12/electric-pedal-car-for-kids/
This is a cover plate with three recessed bolt holes for the Hover-1 brand XLS model electric scooter. It fits over the main pivot point in the middle of the scooter. The original plate has a tendency to crack if the scooter tips over and…
Base angulada para base de direct drive com motor de hoverboard
This is a antenna mount I designed for the XHover Stingy V1 for use with an analog VTX antenna such as the TBS Triumph and a T-style RX antenna such as the one found on the Radiomaster RP2. Printed from TPU on my Prusa XL.
Intro: These are the rear tyres developed for the Breezebuggy outdoor play car (Paid model), but they can probably be used in other applications where hover board motors are desirable. The size allows for good volume to incorporate some…
Dieses Modell passt auf ein Bluewheel Hoverboard Ich habe es aus PETG gedruckt Man kann es ohne Supports drucken
This 3D-printed tyre is designed specifically for hoverboard motors to improve the speed. The tyre is printed without needing an inner tube. The design is optimized for strength and stability, but keep in mind that 3D-printed tyres wear…
XHover Skyeliner Session Couch V1 Message me if you'd like one printed. Please visit my Instagram at https://www.instagram.com/thefpvgeek/ for more designs and other related pics. Category: R/C Vehicles
XHover GAPit Camera Couch Message me if you'd like one printed. Please visit my Instagram at https://www.instagram.com/thefpvgeek/ for more designs and other related pics. Category: R/C Vehicles
These are a pair of rear tyres modeled for the Breezebuggy rideon playcar (paid model) that fit standard 6,5" hoverboard motors. The tyres might come in handy for robot projects or similar that uses hoverboard motors and need some extra…
This is for the new (Oct 2024) HoverAir X1 ProMax. I only have this model so I don't know if it fits any other model they make. It is a tight fit because the drone cage is bigger than the top of the aircraft, so don't be slapping it down…
A hover board for your Pocketnaut. The one in the images was printed at .1 layer height.
Proyecto completo por si necesitais modificar alguna parte
This is a project for a direct-drive sim racing steering wheel base enclosure using a hoverboard motor and an ODESC Mini. This is my first project using FreeCAD, and I essentially learned it during this project. The project is mostly…
Viih's Encoder Mount is needed! https://www.printables.com/model/934160-ffbeast-encoder-assembly The case and the motor mount is recommeded to print in PETG or ABS (warp warning) The orientation of the models are not the best to print,…
Simple quick sleeve case for Hover Air Pro / Max. Ver. 1.0 Offer quick access to your Hover and light protections. For the most part it is held in snug. A stretchable strap can be stretched around to help keep the drone in case. Has…
Hier ist meine Hoverboard Lenk Achse für eigene Spaß Projekte. Das gute an dieser Achse ist das der Reifen sehr nah am Lenk hebel ist, dies hat zu folge das der Reifen nicht so weit ausschlägt unterm lenken. Habe zwei Lenkungen ( Links…
Bring a piece of the vibrant world of Arcane into your collection with this intricately designed hoverboard, inspired by the iconic ride used by Ekko and the firelights. Perfectly crafted for both display or scalable for cosplay, this 3D…
A Hovering Head. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
This model holds the VTX antenna for the Xhover Gapit frame, i also designed this part to have a zip tie that retains the main power cable, I recomend printing this out of TPU or Nylon (This part was printed in CF Nylon ONYX)
Print in TPU. Print with the mounting plate flat on the bed. 3 Perimeters 35% infill Print slow and make sure the filament is dry and has tuned retraction so it looks better than mine. My part was printed with two different colours for…
Here is an arm mounted print that both retains an immortal T style antenna as well as works as skid plates for those rough landings. Print these in a durable material i chose CF Nylon. In the part there are internal channels for zip ties.…
This is a camera holder for the Xhover Gapit, but this should work with any drone that uses 28mm standoffs. Make sure to mirror this part in your slicer for the other side! Print in a felxible materal, i used CF Nylon here but TPU would…
Couldn't source the part so decided to try and use cad and copy it. Part fits perfectly.
Custom Designed Wind Turbine - Version 1.1 12-24V The following description will help you understand the plans for my custom-designed wind turbine. The project is based on a hoverboard motor, which serves as the generator. Most of the…
Habe zwei größen an Hoverboard Reifen erstellt, einer hat 18cm Durchmesser der andere 19cm. Wiso nicht Größer ? Für mein Projekt was ich Baue benötige ich das Drehmoment und bei einer Spannung von 72v Fahren die Motoren ohne hin schon um…
This design is licensed under CC BY-NC . However, specific restrictions apply: Limited Remix Allowed: A limited remix of the top surface is permitted under specific restrictions. No modifications are allowed beyond the surface pattern of…
This design is licensed under CC BY-NC . However, specific restrictions apply: Limited Remix Allowed: A limited remix of the top surface is permitted under specific restrictions. No modifications are allowed beyond the surface pattern of…
This is a, light-weight minimalist protective rubber boot for a HoverAir X1 ProMax. The X1 ProMax is a small folding drone that conveniently slips into a large pocket, so pointless having a large and heavy storage box (as supplied with…
This is a, light-weight minimalist protective rubber boot for a HoverAir Beacon as used with X1 autonomous flying camera's / drones . The X1 series are small folding drones that conveniently slips into a large pocket, so it is pointless…
I want to start making little figures that will all be in a series
Would be more efficient with duct but works aight without. It should cool the motor by about 10 degree Celsius. (with very rudimentary testing) You need the ether reuse the stock screws or get a longer one. I think they should be standard…
As the lens of the X1 Pro/ProMax is quite sensitive to flaring, I decided to create a barn door attachment. Print at the highest possible resolution, it's a small object and wont take long either way. There may be some gaps at the bottom…
CURRENTLY STILL IN PROTOTYPING STAGE! Hoov (HoverHoof) is an attempt on an optimal vibration dampener (hopefully our last) not only for speakers and audio equipment but also for 3d printers i highly recommend using 3-4 footers with a…
There are a couple of balloon powered hovercraft disks out there. The advantages of this one are: easy operation: There's a mouth piece that simply screws off, so you can blow up the balloon through it and screw it on again without the…
the first thing i made in f360. so it might not have the best time line
This design is licensed under CC BY-NC . However, specific restrictions apply: Limited Remix Allowed: A limited remix of the top surface is permitted under specific restrictions. No modifications are allowed beyond the surface pattern of…
Simple model to show air pressure and have fun with teaching. If my work has helped, please consider buying a coffee :) www.buymeacoffee.com/will_smith
This is my version of the HOVERAir X1 PRO and PROMAX case. I use my drone for skiing and wants it to be a little bit protected in my jacket if I fall while skiing. The idea is to leave the beacon in the case and turn it on without taking…
To see how it works check out this video: The printing requires no special precautions, it works great with PLA. The inflator is best printed with the thick part on the plate. No support required. Please note the following tips: Use the…
I've been dreaming of owning a hoverboard since I was a kid. Well, this one you can't ride, but it's a start ! VIDEO TUTORIAL [EN,DE,ES,FR, sub] Buy the components: https://jeje-linge.fr/en/products/le-vrai-hoverboard-1
Made a 70mm mount for the DD base from Hoverboard
This is a replacement housing to make a toy drone fly again. It works and has been tested by the children for its robustness;-) The drone's lights look even better than the original black one. The original folding mechanism to convert the…
DirectForce Wheel 🏎 📄 Description DIY Direct Drive steering wheel, powered by a hoverboard motor! This project includes a fully 3D printable enclosure, essential mounting parts, components list and a build guide, ensuring a solid and…
I wanted to build a little hovercraft for fun and needed some way to clamp two of them to a bit of ply. This design provides such a design. I've added a slot for TPU to provide a tight fit. You can print this with no supports, but I…
Made these designs for the Hover Air PRO/MAX. As you can see in the pictures, the RC Cover is simply placed on top of the fully assembled Beacon/Joystiks. If you then press the mobile holders together, it is fixed. There is also space in…
See v2 which adds a couple different options and hopefully makes the Fusion 360 model easier to adjust with parameters here: https://www.printables.com/model/1326250-encoder-and-slip-ring-mount-for-ffbeast-wheel-v2 mount for the MT6701…
Gives you a standard computer mount on top, and a sort of general purpose mount on the bottom. Provided are two variations to mount a GoPro on the bottom; one with a sort of basic mount, and one that can use the GoPro quick release…
This is a replacement for the original gimble protector which I decided was too large, too cumbersome and a distraction. Mk2 is minimalist but affords the same level of protection and movement stability. It remains within the footprint of…
I used 2 40a 4s escs with 2 5 inch fpv drone motors for power, along with a small servo for steering and a pwm reciever. The skirt is made from a trash bag and attached with duct tape, and it needs weight on the back to balance out the…
I designed this model to be large enough to work on multiple surfaces and transitions(grass, water, pavement, etc.) The hovercraft floats on water when the motors are off, thanks to the foam bumper and float assembly in the hull. Vapor…
R/C hovercraft with parts that can be printed easily, and mostly without supports. The hovercraft will require some basic assembly work. Below, you'll find the list of parts required, as well as some assembly instructions and some…
Made for the original HoverAir X1 (see alternative design for the ProMax). A compact and flexible device to protect the camera gimble and resist the drone being accidently opened in a pocket. Made from 93 shore TPE. Prints outer face…
this model used L backet for holder and more compact,economy and robust
This RC hovercraft is a fully 3D-printed, modular vehicle designed for land and water traversal. It features two brushless DC motors—one providing vertical lift and the other driving forward thrust—along with a servo-controlled rudder for…
Altough I CNC milled this part from aluminum, it might be useful or even work when 3D printed. Re-used the original mounting bracket and screws of the hoverboard chassis. Used the hub motors for a robot project in combination with VESC…
Tool to help marking the line for cutting the skirt which is 1.5i or 4cm away. Made for the Simple Brushless RC Sport Hovercraft made by Sir_Lancelot178.
If you appreciate my work and like it, you can buy me a coffee ;) but this is absolutely not expected. Short introduction: The alignment of the magnet and encoder is the most critical factor for the mechanical precision of the steering…
