Coffee Tamper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Handy press to aid with compressing coffee prior to brewing.
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 68
- Makes
- 0
- Views
- 743
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Public Domain
This design was created to provide a simple way to pack coffee grounds for brewing. I've included two methods to move the arbor, a lever and a wheel. Both methods are included.
The press frame will need to print with supports. On the frame arm I increased the infill to 25% for added strength and used the cubic infill pattern. I Printed it in PLA.
The gear was printed with PLA at 100% infill.
The rack was printed with PLA at 100% infill. I printed it with the rack teeth on the build plate with good results.
The shaft was printed with PLA plus at 100% infill. For the hand wheel, I created a modifier to to have the shaft print at 100% infill while the wheel was at 15%. It was also printed with PLA plus.
Both parts of the lever were printed with PLA plus at 100% infill.
The nest was printed at 15% infill with PLA.
The press plate was printed with PLA at 25% infill with support material for the center hole.
One M4 x 20 SHCS is required for assembly.
Added an extended shaft hand wheel for additional clearance if required.