1 / 1
Spool/Bobbin Holder for Skadis
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A holder for Spools or Bobbins, e.g. for Wires on Ikea Skadis
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 20
- Makes
- 1
- Views
- 156
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple Spool holder for small wirespools with up to 90mm diameter and an inner hole of at least 20mm diameter. It works very well e.g. for these wire spools (affiliate link), as shown on the photo.
It uses these pegs (follow link, not my design), you will need 1 of these. They just snap fit into the back and work quite well.
I printed in Prusament PETG in 0.25mm Speed Mode. I recommend organic support for the slots on the rear side and for the peg holding the spool.