1 / 5
GoPro Mount parametric
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A GoPro mount with print in Nut and with FreeCad file for adjusting to your own liking. 22mm S
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 46
- Makes
- 0
- Views
- 322
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A GoPro Mount that I originally made for this https://www.printables.com/model/878658-garmin-mount-for-aerobars-parametric
Can be used for anything or adjusted. The hole distance is 22mm and the holes are made for standard M3 heatset inserts.
Filament: Fusrock ABS-GF 10%
Infill: 40%
Bottom/Top: 5
Wallloops: 4
Layerheight: 0.2mm
Print laying on the side with tree support but use a support blocker cylinder for the nut part (see picture)
Halt at beginning of layer 98 to place a M5 Nut (see picture)