1 / 6
BT2.0+BT3.0 or XT60 - FPV - Battery Checker / Voltage Meter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is not the most accurate battery checker, but its good for gut checking if a LiPo is full, used, or mostly dead.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 17
- Makes
- 0
- Views
- 189
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
I used my soldering iron to secure the two halves together, and to secure the battery plugs to the case. I also used e6000 to secure the LED panel in the front… never used a screw, but its there if you want to, m2. Keep wires short. I wrote some labels for rough voltage ranges to expect on specified cell counts.
Parts I used:
0.28 inch DC LED Digital Voltmeter Meter Case 2.5-30v
BT2.0 & BT3.0 Female Ports
XT60 Female Ports
20AWG Wire