Articulated Tassel Whip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Every segment of the whip, including its elegant tassels, is interconnected, allowing for seamless printing without the
- Rating
- 0 / 5
- Likes
- 10
- Makes
- 0
- Views
- 388
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Cosplay & Costumes in general
- License
- Standard Digital File License
Printing Settings
- Filament Material: PLA
- Layer Resolution: 0.2 mm
- Infill Percentage: 15%
- Supports: No
- Brim: No
- Bed Temperature: 60°C
- Nozzle Temperature: 210°C
Printing Information
- Nozzle Size: 0.4mm
- Estimated Printing Time: Approximately 14 hours 39 minutes
- Print Volume: 201mm (width) x 201mm (depth) x 190mm (height)
- Printer Used: Prusa i3 MK3S
- Slicing Software Used: PrusaSlicer
Additional Information
Ensure your printer is well-calibrated and the bed is leveled for optimal results. Maintain bed adhesion by keeping the bed clean and free of grease. Use isopropyl alcohol for cleaning and apply adhesive if necessary.