P
PrintablesDomes
Mini-Whip Antenna Case
Simple casing & mount for Mini-Whip antenna from AliExpress, link here .
- Downloads
- 126
- Likes
- 18
- Rating
- 5
Search results: whip
141 models
P
Printablesmscalora
Paracord Melting (Whipping) Form - Melt neat and clean ends on paracord
UPDATE: See my newer version that supports all three sizes in one device with a hinge. https://www.printables.com/model/1322380-super-deluxe-paracord-melting-whipping-form-melt-n Original version: This simple device allows you to melt the…
- Downloads
- 103
- Likes
- 18
- Rating
- 5
P
Printablesmscalora
Super Deluxe Paracord Melting (Whipping) Form - Melt neat and clean ends on paracord
This model allows you to “whip” paracord using a flame to a fine point that will pass through nearly any hole where the paracord fits. It supports a variety of “550” paracord thicknesses from about 3.0mm to about 3.4mm. Handles all of the…
- Downloads
- 95
- Likes
- 30
- Rating
- 5
P
PrintablesOuwekaas
Funkamateur MiniWhip antenna holder for fishpole
Funkamateur MiniWhip encloser to be used on a fishpole. Diameter hole for fishpole is 5.5mm Printable right up, supports are needed only for the lower parts, block te rest. I printed with PETG Desert storm matt from brand Spectrum. 0.2mm…
- Downloads
- 73
- Likes
- 3
- Rating
- 0
P
PrintablesAdam Kimmerly
40 m Vertical Antenna Loading Coil for 5 m (17 ft) Whip
Note: these build instructions are preliminary - I'll try to update them with more detail when I have time, but I wanted to get these out there. BACKGROUND: 5 m telescopic whip antennas have become readily available and very popular…
- Downloads
- 420
- Likes
- 74
- Rating
- 4.75
P
PrintablesReinis Miķelsons
Chain whip
No supports. No brim. Infill 15%. Layer height 0.2 Requires approximately 144 chain links. Chain links fits together well and does not tangle or come out.
- Downloads
- 406
- Likes
- 65
- Rating
- 5
P
PrintablesDavid Wood (dwuk3d)
Whippet Puppies
Update: 18/8/23: As a result of feedback on another site - have uploaded a new Bambu Lab specific version - with 8 plates included with different options for printing individual or both dogs. 23/8/23 Tested plate 7 file uploaded - see…
- Downloads
- 316
- Likes
- 47
- Rating
- 5
P
PrintablesMici
DUMMY 13 - Whip + hip holster - V2.0
Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 I designed these for one of my costumes (Catwoman): /model/678691 DUMMY 13 outfit collection “DUMMY 13 goes to COMIC…
- Downloads
- 307
- Likes
- 100
- Rating
- 0
P
Printablesgrizzie17
Bambu Lab A1 Wire Whip
A simple model that helps support a droopy hot end wire. Printing No supports Orient “whip” on its side History 2024-08-06: Updated models to provide for a better printing experience and to shift the “Cold Base” to provide a better and…
- Downloads
- 277
- Likes
- 49
- Rating
- 5
P
PrintablesJA:GR
Velikonoční pomlázka (Easter braided whip)
I wanted to design this braided whip last year, but I was missing modeling skills I needed. This year it worked :) The most difficult part was to understand the pattern, because on thing is the process of making it from willow twigs and…
- Downloads
- 254
- Likes
- 22
- Rating
- 5
P
PrintablesJohnV
Ryobi Whipper Snipper Blade
I decided to model and print replacement blades for my Ryobi 18v One+ Whipper Snipper (aka Line Trimmer). Even printing using PLA filament, I was pleasantly surprised at how well they worked. If you do decide to print some of these I…
- Downloads
- 250
- Likes
- 27
- Rating
- 5
P
PrintablesiPaperClip
Low Poly Dog - Whippet/Greyhound
REMIX: Credit to Tubbers (Listed as original author on Printables) I made the base of the Whippet flat for printability. This model is scaled to 1350% of the original to fit the entire bed 220x220. I did not try printing the original…
- Downloads
- 246
- Likes
- 29
- Rating
- 5
P
Printablesthall72
Lego Compatible (2569.dat) Antenna 8H Whip
This model is compatible with the lego system.
- Downloads
- 232
- Likes
- 25
- Rating
- 5
P
PrintablesMiaoucat
Spool Line Holder for Tenkara Fishing or Whip fishing (herabuna)
simple glue two print together to make a complete spool. i print 4 at a time and it take me only 55min with a 40mm/s speed. put the top and bottom shell to 0mm to see the infill. choose your desired infill design, the infill holes make…
- Downloads
- 231
- Likes
- 44
- Rating
- 0
P
PrintablesMike
whip correct
I added a file to the remixes where the whip is correct.
- Downloads
- 231
- Likes
- 9
- Rating
- 5
P
PrintablesMichal Koláček
Greyhound/Whippet Pendant
It's a pendant / Xmas decoration with a greyhound or a whippet on it.
- Downloads
- 226
- Likes
- 28
- Rating
- 5
P
Printablesthall72
Lego Compatible (88704.dat) Minifig Whip Bent
This model is compatible with the lego system.
- Downloads
- 223
- Likes
- 32
- Rating
- 0
P
PrintablesNW6U
DodecaWhip - V-Dipole HF portable antenna system
WORK IN PROGRESS - near final revisions. *Please leave feedback on this tutorial and the prints. It will only help to improve the overall model. I am a big fan of open-source and improving upon established products and standards. I am…
- Downloads
- 208
- Likes
- 29
- Rating
- 5
P
Printablesthall72
Lego Compatible (61975.dat) Minifig Whip Coiled
This model is compatible with the lego system.
- Downloads
- 196
- Likes
- 34
- Rating
- 0
P
PrintablesSteph
Sitting Grehound / Whippet Low Poly
This is a 3D model of a sitting whippet or greyhound. You will need support for parts of the belly and head/ears, but should be pretty straightforward. I had some problems with the overhangs of the ears, but I am sure that some…
- Downloads
- 194
- Likes
- 6
- Rating
- 0
P
PrintablesMattias Lindström
Greyhound/Whippet fridge magnet
Greyhound or whippet as a fridge magnet. Print with the magnet debossing up, on a glass bed for excellent surface finish. Magnet used is Ø12x2mm Edit: Grey_nomag.stl is without the recess for a magnet.
- Downloads
- 185
- Likes
- 19
- Rating
- 0
P
Printablesueda
Bayonet Whip / Dragons Tongue
With this project I recycled early prototypes of my bayonet blade from the HEMA musket project. It is modeled after original 1800s british musket bayonets with an enlonguedback portion to reach a Length of 60cm. Print the blade from TPU…
- Downloads
- 174
- Likes
- 37
- Rating
- 0
P
PrintablesTriple G Workshop
Banksy's The Whip - 3 Color w/filament changes (1 at a time)
Start with White, then go Black, then Red last. 3 colors/ 2 changes total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
- Downloads
- 163
- Likes
- 70
- Rating
- 0
P
Printablesfirstgizmo
Windshield Whiper Scale 1/10
Print the whiper in the given orientation. After printing, you need to brush the tip of the whiper with a smal lighter flame in order to make it soft. Bend it 90° to fit on the Armadillo
- Downloads
- 154
- Likes
- 24
- Rating
- 5
P
Printablesrbazile
Miniwhip Antenna Waterproof Case
This is a simple waterproof casing for a Miniwhip antenna clone from China. This particular antenna is 80mm x 35mm in size, with a supplied power injector. I designed the enclosure to be waterproof. The two parts are joined by a thread.…
- Downloads
- 153
- Likes
- 23
- Rating
- 5
P
PrintablesJoshua2100
Stihl FSA 56 Whipper Snipper Line Cover
top cover for a sthil fsa56 line trimmer needed a replacement after my original tabs broke up so i made this one has a flat top for ease of printing print .2 with supports for tabs
- Downloads
- 147
- Likes
- 11
- Rating
- 0
P
PrintablesLinus
Chain whip from Castlevania 6 inch figure scale, print in place
This is a model of the chain whip from castlevania. It scales decently with 6 inch figures but I wouldn't force it into any figure's hands. It should print with supports and work perfectly. The file labelled “optimised” is at an angle to…
- Downloads
- 145
- Likes
- 16
- Rating
- 0
P
PrintablesFlisher
Equestrian Whip Holder (8 slots + Logo option)
As a equestrian dad… whip started to clutter my daugter space and I wanted to find a nice looking solution. This design allow to hold up to 8 whips an allow to add your favorite place logo. Update: I had one printed in PETG and one in ABS…
- Downloads
- 143
- Likes
- 8
- Rating
- 0
P
PrintablesSurrealAqua
Red Lizard Whiptail Cave
A cave I made for my Red Lizard Whiptails to breed in. The files are a housing for the caves and a cave file. You will need to print one housing and 8 caves for the full setup. There are “wings” on one side of the housing, this is meant…
- Downloads
- 131
- Likes
- 8
- Rating
- 0
P
PrintablesLinus
Action figure chain whip
This is a chain whip I designed for my ghost rider action figure. Once you've printed it, just peel away the supports and you should be good to go! I printed it on an Ender 3 S1 with PLA+ and it came out perfectly.
- Downloads
- 122
- Likes
- 24
- Rating
- 0
P
PrintablesFlyAttack
ISI Cream Siphon / Whipper Case
A case to hold an ISI Cream Siphon / Whipper Print instructions Just barely fits on a bed of a mk3. Included 3mf with some custom infill modifications to use less filament if desired.
- Downloads
- 112
- Likes
- 12
- Rating
- 0
P
Printablesthall72
Lego Compatible (2488.dat) Minifig Whip
This model is compatible with the lego system.
- Downloads
- 107
- Likes
- 13
- Rating
- 0
P
PrintablesMiniSumo
14mm Male Whip Adapter for Ground Glass
Background This is aimed at helping a clumsy person reduce the risk of broken glass. They use a Sneaky Pete Mega Globe from Vape Wellness to bubble filter their medical cannabis vapour. Design Similar to the 14mm stopper for ground glass…
- Downloads
- 95
- Likes
- 7
- Rating
- 0
P
PrintablesBřetislav Uhlíř
HENDI - decorating attachment for whipped cream
Dva druhy nástavců. Květ 2 má jen trochu silnější stěnu.
- Downloads
- 93
- Likes
- 5
- Rating
- 0
P
Printablesdeinfinityx
Experimental 3D printed whip
Printed in 85a TPU it kind of works but not quite and is prone to breaking
- Downloads
- 86
- Likes
- 5
- Rating
- 0
P
PrintablesMiaoucat
V Dipole Hub for M4 Whip Antenna 118cm telescopic multi band HAM 2M Tripod mount 1.4m
[Universal V dipole Antenna Hub] for m4 whip and BNC coax this is a simple, but extremely practical antenna system that is multiband capable. it enables you to adjust it to practically any frequency within its physical limit. should be…
- Downloads
- 85
- Likes
- 20
- Rating
- 0
P
Printables1944GPW
Knob to suit Ryobi Pro Cut II line trimmer / whipper snipper / strimmer / weed whacker head
The securing knob on my Ryobi Pro Cut II whipper snipper head literally wore out. This is the head type where short lengths of line are cut and pushed through the side of the head and are held by ratchet cam pawls. This knob works very…
- Downloads
- 71
- Likes
- 7
- Rating
- 4
P
PrintablesFoe
JP Whip Antennae Base RS style base
For those making a JP Jeep, this base is adapted to a ProComm-JBC986 3in ball mount. This only gets you a little closer to "Screen Accurate" using the existing mount. It is setup to look like the Radioshack base mount for those who want…
- Downloads
- 70
- Likes
- 2
- Rating
- 0
P
PrintablesMiaoucat
Fishing Whip Holder Competition Style
this is design inspired by a CNC aluminum fishing rod holder used in competition fishing for Herabuna. a special kind of carp that is very finicky. a long reel-less telescopic rod is used, generally float fishing. this holder is compact…
- Downloads
- 67
- Likes
- 17
- Rating
- 0
P
PrintablesSaleh
Whipped Cream Can Button
You simply slide it onto the tip of the whipping cream can and Viola! You press down on the button to let whipping cream come out! This would mainly be used for if you're going to spray a lot of whipped cream in one sitting, to make sure…
- Downloads
- 65
- Likes
- 18
- Rating
- 5
P
PrintablesPeter
Korbáč - Easter wicker Whip
Pre autentickú flexibilitu nástroja odporúčam tlač s TPU filamentom.
- Downloads
- 63
- Likes
- 6
- Rating
- 5
P
PrintablesSaddamCZ
Tescoma Cream Whipper Cartridge Thread Cap (M22)
The new Tescoma Delicia cream whippers do not come with a cap to cover the cartridge thread, so you either have to have the thread exposed (ugly, unpleasant to touch, might get damaged) or keep the long, charging cartridge container on…
- Downloads
- 63
- Likes
- 6
- Rating
- 5
P
PrintablesNeoPrint3D
Neo whip
A cool prop designed with fusion 360. Just a sick whip. Infinitely expandable I am making something you can put at the end of it to make it look even more sick! supports only for the handle. It might not even need it if your printer can…
- Downloads
- 60
- Likes
- 6
- Rating
- 0
P
PrintablesSchlossbauer
Whip Jelly
A Whip Jelly. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
- Downloads
- 59
- Likes
- 15
- Rating
- 0
P
PrintablesPrintingCanBeFun
Whip mouthpiece for vaporizers such as Arizer Extreme Q
Handy mouthpiece designed to fit glass connectors with a 3/8ths inch outer radius. Note: Common red brass nozzles contain up to 5% lead and some makers suggest not making products which come into contact with mucus membranes with brass…
- Downloads
- 55
- Likes
- 6
- Rating
- 0
P
PrintablesLucidityCrash
FTX-1 uhf-vhf whip vertical support.
The print provides additional support when using https://makerworld.com/en/models/1959626-ftx1-uhf-vhf-whip-support#profileId-2106176 to keep the whip from falling backwards. You place the print on the first right angle adapter.
- Downloads
- 43
- Likes
- 2
- Rating
- 0
P
PrintablesRMR Technics
Gas cannister container for whipcream bottle M22
For all broken whipcream bottles, here is the long awaited cannister holder.
- Downloads
- 43
- Likes
- 5
- Rating
- 0
P
PrintablesMiaoucat
Base for DIY whip antenna 3/8 24 CB type bracket 10m vertical GP ground plane HAM radio HF
[Base for HF whip] this is the BASE and COIL for a whip made from a 8mm fiberglass rod. this is made for 3/8" x 24 bolt. sadly i dont remember the HEX head size. please be careful and measure it and compare before printing. everything is…
- Downloads
- 42
- Likes
- 13
- Rating
- 0
P
PrintablesCreeaytiv
Whiplash Battlebot
Simple easy to print and assemble whiplash, just print with supports on and glue the two covers over each side of the lift arm.
- Downloads
- 42
- Likes
- 5
- Rating
- 0
P
PrintablesWalter Spanu
Lord Of The Rings Wall Plaque silhouette frame 15x20cm - Fellowhips and Towers
Hey visitor, found your favorite film or TV show? Check out the full movie collection here: https://www.printables.com/@WalterSpanu_3005190/collections/2922712 This model is a Lord of the Rings–themed silhouette scene featuring iconic…
- Downloads
- 41
- Likes
- 12
- Rating
- 0
P
PrintablesAaron
Megaera's Whip
A model I made for my daughter's Halloween costume. Printed at .15 layer height. You need two of each small chevron and one large chevron. I suspect the two small chevron's are pretty much identical once printed, but I'd print two of each…
- Downloads
- 40
- Likes
- 23
- Rating
- 0
P
Printablesatvfool
Wolf River Coils Silver Bullet 1000 Mega 24" Tripod and 102" Whip Holder
Keep your Wolf River Coils TIA Mega kit organized. Made specifically for the 102" whip and 24" tripod legs and Silver Bullet 1000 Coil with the tripod mount attached. If nothing shows in your slicer scale to 1000%
- Downloads
- 40
- Likes
- 8
- Rating
- 0
P
PrintablesYO3GND
POTA PERformer antenna mount for M10 whip
POTA PERformer is an antenna designed by KJ6ER around telescopic whips. This is a design that encapsulates an M10 50mm tall insulator and allows mounting on a tripod. BOM 4 pcs, M3 x 16 4 pcs, m3 nut DIN557 square M10 50mm insulator M10…
- Downloads
- 38
- Likes
- 7
- Rating
- 0
P
PrintablesOuwekaas
MiniWhip Antenna holder for fishpole
A simple holder for the original MiniWhip (produced by PA0RDT). It fits on my fishpole with top diameter of 5mm. Printable right up, no supports needed. I printed with PETG Galaxy Black from Prusament. 0.2mm layers, Fuzzy skin enable for…
- Downloads
- 37
- Likes
- 7
- Rating
- 0
P
PrintablesRoy Damann
Ryobi repair part weed whip blade hinge pin
print with 100% infill out of something as strong as PETG or stronger… these are made to break but we have gotten more time from the printed replacements than the original part. Brim is a must, its a small part with a small footprint.…
- Downloads
- 33
- Likes
- 6
- Rating
- 0
P
PrintablesDed Makar
Beatrix Keener - Coachwhip
Beatrix Keener - Coachwhip - Marvel Comics
- Downloads
- 32
- Likes
- 5
- Rating
- 0
P
PrintablesCostal Radio
14MHz (20m band) Coil for Gabil 50" Whip
This is an improved version of my 20m loading coil for Gabil 50" whip. It should be MUCH easier to actually make. This print should work on most printers without needing support material (all overhangs kept to 45 degrees). PETG…
- Downloads
- 29
- Likes
- 7
- Rating
- 0
P
PrintablesCostal Radio
7MHz (40m band) Coil for Gabil 50" Whip
This is an improved version of my 40m loading coil for Gabil 50" whip. It should be MUCH easier to actually make. This print should work on most printers without needing support material (all overhangs kept to 45 degrees). PETG…
- Downloads
- 29
- Likes
- 5
- Rating
- 0
P
Printablesrakoenig
Schneebesen-ständer / egg whip stand Kenwood Cooking Chief
Damit das Zubehör der Kenwood Cooking Chief Küchenmaschine nicht in einer Kiste aufbewahrt werden muss hier ein einfacher Ständer zur Aufbewahrung des Schneebesens. To avoid collecting all the parts of your Kenwood Cooking Chief food…
- Downloads
- 29
- Likes
- 2
- Rating
- 5
P
Printablesmilous22
Whipped cream spray dispenser
Suitable for cans with 1-inch valves (32,5mm outer diameter). For assembly: 1x screw M4x30 with hexagonal head 1x screw M4x25 2x nut M4 Created with OnShape:…
- Downloads
- 27
- Likes
- 5
- Rating
- 5
P
Printablesatvfool
Wolf River Coils TIA 24" Tripod and 102" Whip Holder
The tripods legs are meant to go through the holder and the whip got into the thicker slot. The idea is to print 2 of them and put them on opposite sides and use a short length of paracord to keep slight tension to keep it all together,…
- Downloads
- 26
- Likes
- 4
- Rating
- 0
P
PrintablesOH8EFI
MiniWhip Antenna Holder for 50mm pipe
This was needed because I wanted to solve the housing problem for my MiniWhip antenna. It needed to be installed inside a PVC pipe and also having a possibility to replace the antenna if needed.
- Downloads
- 26
- Likes
- 2
- Rating
- 0
P
PrintablesJoe Formica
98770A Line Trimmer Whipper Snipper starter pully
The starter pull start pulley on my Ryobi Whipper snipper lost the teeth. Designed in Fusion 360, printed in PETG. Update the PETG sheared off the teeth pretty quickly. I printed it again in 90 hardness TPU and it seems to be better. I…
- Downloads
- 24
- Likes
- 3
- Rating
- 0
P
PrintablesPandadog
A1 Wire Whip Base Cold Improvement
This is a remix of Bambu Lab A1 Wire Whip von grizzie17 | Kostenloses STL-Modell herunterladen | Printables.com . For the other parts, see the original.
- Downloads
- 22
- Likes
- 1
- Rating
- 0
P
PrintablesPrintCube3D
Elf duck with a whip and wings
Elfe duck with a whip and wings has supports the whip is a piece of fillament twisted
- Downloads
- 19
- Likes
- 5
- Rating
- 0
P
PrintablesMonsieur-Pierre
Milkshake with Whipped Cream Model
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A detailed miniature milkshake featuring a ribbed cup,…
- Downloads
- 19
- Likes
- 4
- Rating
- 4
P
PrintablesCostal Radio
10MHz (30m band) Coil for Gabil 50" Whip
This is an improved version of my 30m loading coil for Gabil 50" whip. It should be MUCH easier to actually make. This print should work on most printers without needing support material (all overhangs kept to 45 degrees). PETG…
- Downloads
- 18
- Likes
- 5
- Rating
- 0
P
PrintablesJoScott
5.6M/17' Antenna Telescoping whip support
I created this model in Fusion. I wanted to make it to fit the basic trucker style antenna mount. I have it wrapping around the base structure then I made the hole to where the bottom fits in the hex screw base mount as well as the wider…
- Downloads
- 17
- Likes
- 2
- Rating
- 0
P
PrintablesWerkbankWizzards
Whipl hair dryer storage
Didn't found a storage for the whipl hair dryer so we did one by ourselves.
- Downloads
- 17
- Likes
- 4
- Rating
- 0
P
PrintablesStefan Junger
Boni-Whip Stativhalterung
Der Halter erlaubt die Nutzung der Boni-Whip auf beliebigen Fotostativen - direkt aufgeschraubt oder mit Adapterplatte. Zusätzlich wird folgendes benötigt: 1 x ¼" Gewindeeinsatz Zum Drucken eignen sich PLA, PETG und natürlich auch andere…
- Downloads
- 17
- Likes
- 3
- Rating
- 0
P
Printablesfpvgio
Whip Antenna LHCP/RHCP Converter
A converter made by following the instruction of this VAS- Video Aerial Systems video. https://youtu.be/n-ngHnxWPaY?si= It seems they offer a similar higher quality product based on the same ideas in the video, but in a much smaller and…
- Downloads
- 15
- Likes
- 0
- Rating
- 0
P
PrintablesDL9PK Phil
St. Louis POTA 20 Antenna w/ 1/4-20x7 Heat Insert + 10 mm whip hole + 6 mm banana plug hole
I adjusted the original design to fit my needs/material on hand. A banana plug allows for easy connection of the radial.
- Downloads
- 15
- Likes
- 5
- Rating
- 0
P
PrintablesViridian
Pumpkin Pie Prop with Whip Cream
Pumpkin Pie Prop with Whip Cream
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
PrintablesSamuel Kočiščák
Whipper hex bit conversion
CS: Ručka na klasickém šlehači na vajíčka zn. Plastimat Liberec je šroubovací a dá se snadno vyměnit za ¼" nástavec do aku-šroubováku, já používám Bosch IXO, ale nátavec sedne do každého šroubováku. Inspirace přišla, když jsem viděl…
- Downloads
- 12
- Likes
- 1
- Rating
- 0
P
PrintablesZakoplex
VE7ZAX - Whip Antenna Trekking pole mount for SOTA quarter wave 5.6m Vertical
Easy little project that makes for a fast stable mount for your whip antenna on a rocky summit or anywhere else. Two crossed trekking poles, or a couple of sticks at the base are held in place with two velcro straps. Just posting this is…
- Downloads
- 12
- Likes
- 3
- Rating
- 0
P
PrintablesMurder Hornet
Temporary HF Telescopic Whip Antenna Mount
This lets you support a HF whip antenna to a deck railing or other structure.
- Downloads
- 12
- Likes
- 1
- Rating
- 0
P
PrintablesSteveYYC
ThinkNode M1 Whip Antenna Coupling/Collar
Just a little plastic coupler to fill the gap between a whip antenna and the ThinkNode M1 case. Re-uses the o-rings that came with the compact antenna.
- Downloads
- 12
- Likes
- 2
- Rating
- 5
P
PrintablesLaisch
s'whipper replacement button
replacement button for thermoplan s'whipper cream machine wich was broken.
- Downloads
- 12
- Likes
- 0
- Rating
- 0
P
PrintablesDingezzz
Scherazard whip trails in the sky
Decided to make the model for the whip Scherazard Harvey uses in the Trails series. The weapon differs slighly from render to render and from ingame moments. Decided to base it mostly of the in game model of Trails in the sky first…
- Downloads
- 11
- Likes
- 1
- Rating
- 0
P
PrintablesDecorartor
Whipped Cream Berry Photo Frame
Add a sweet playful accent to your space with this Whipped Cream Berry Photo Frame , 3D printed in matte plastic and designed to look like a fluffy whipped cream border topped with cute strawberries and cherries. The dessert-inspired…
- Downloads
- 11
- Likes
- 4
- Rating
- 0
P
PrintablesKat
Protection for whipped cream (for german cups )
If you like to go shopping by bike or with a backpack you know the problem. Where and how do I put the cream cup that it does not break and everything in the bag is divided up evenly. Therefore, here now comes the solution. I have a…
- Downloads
- 11
- Likes
- 2
- Rating
- 0
P
PrintablesJosé Pedro
Chibi Bulbasaur From Pokemon With Vine Whip Figurine 3D Printable
Detailed 3D printable Chibi Bulbasaur From Pokemon With Vine Whip figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license:…
- Downloads
- 10
- Likes
- 4
- Rating
- 0
P
PrintablesMetabois
Support Sopalin / Scotch - Tape or Whipe Holder
J'ai remixé un modele de support de scotch Skadis (que j'utilise dans mon atelier) en support pour Sopalin / Essuie tout pour qu'il puisse être fixé a ma crédence de cuisine a l'aide d'un simple morceau de double face. Quand ma cherie l'a…
- Downloads
- 9
- Likes
- 0
- Rating
- 0
P
PrintablesVuLcAiN
Kids set of whip and knife
Here’s a small set of whip and knife, made just for fun and with lots of love. When printing the whip, make sure to slow down your printer . You can print it in multiple colors—I chose to go with a single color and paint it afterward.…
- Downloads
- 9
- Likes
- 7
- Rating
- 0
P
Printableshobseri4315
XPro Ranger LED Whip Mount with License Plate Holder
Led Whip light and OHV license plate framer for Xpro Ranger Mini Jeep. Lines up with bolts on rear grab rail. Printed with PETG, Thick walls and cubic grid.
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
Printablesjbtronics
MiniWhip Power Injector Case
MiniWhip Power Injector Case with 9V battery This is a case for the power injector delivered with my miniWhip active antenna. The Case has two holes to lead out the antenna and receiver connections via BNC sockets. Power for the antenna…
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
Printables3D Master
Flesh Golem Demon with Whip Christmas Figure
Bring a dark, mythical presence to your display with this imposing 3D printable demon figure! 😈 This creature, resembling a flesh golem with sharp horns and a long tail, is ready for mischief. It's a striking and unique print for those…
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
PrintablesVinny0769
21mm light whip clips
These are for holding your lighted whips. When you take them off the mount. These are designed for 21mm diameter whips.
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
Printableshobseri4315
Led Whip Mount for Xpro Ranger
Led Whip Mount for Xpro Ranger Mini Jeep. Lines up with bolts on rear grab bar. Printed with PETG. 1.2 walls and cubic grid.
- Downloads
- 5
- Likes
- 0
- Rating
- 0
P
Printablesh2odragon
"Whip Me" sign
100x160mm sign, reading "Whip me, beat me, Make me Bleed" Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my signs . Please…
- Downloads
- 5
- Likes
- 3
- Rating
- 0
P
PrintablesBuxton
Vaporizer whip 8mm OD glass mouthpiece cap
A flex (tested and printed originally in 85A TPU, would love to hear how it is in other filaments) designed and tested vaporiser whip cap for stopping vapour leaking out when not in use. If you need a different diameter or design just let…
- Downloads
- 5
- Likes
- 3
- Rating
- 5
P
PrintablesCrimsonDawn
Proper Pumpkin Pie to Whipped Cream Ratio
Prints just fine with standard settings.
- Downloads
- 4
- Likes
- 1
- Rating
- 0
P
Printablesvidision
Air Port Cap for Whipped Cream Canister
A basic threaded cap for canisters using, good for replacing lost originals or for color coding!
- Downloads
- 3
- Likes
- 1
- Rating
- 0
P
Printablesderileek315
Dock Edge+ Mooring Whip Tip Replacement
Dock Edge+ Mooring Whip Tip Replacement Replacement tip for the Dock Edge+ Premium Mooring Whip. The stock plastic tip is a known weak point — mine cracked and broke within a few months outdoors. This one has been mounted outside for over…
- Downloads
- 3
- Likes
- 0
- Rating
- 0