Base for DIY whip antenna 3/8 24 CB type bracket 10m vertical GP ground plane HAM radio HF
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
made to fit on a "CB" style adaptor base with isolators. i personally make a little alumilium bracket with radials.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 42
- Makes
- 0
- Views
- 1,227
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
[Base for HF whip]
this is the BASE and COIL for a whip made from a 8mm fiberglass rod.
this is made for 3/8" x 24 bolt. sadly i dont remember the HEX head size. please be careful and measure it and compare before printing. everything is epoxy'ed togueder to make for a strong construction that is water tight. the use of the “CB mount” is required. you must solder your antenna wire onto your bolt… personally i twist the wire around the whip, it help getting a bit of inductance/capacitance and make for a tiny bit wider bandwith.
MATERIAL:
- 8mm fiberglass rod
- 3d printed base and optional loading coil
- epoxy glue
- 3/8 X24 bolt
- wire for antenna (ive used copper and alumilium wire)