Counting matching models…
Sussie : Kpop Demon Hunters. Magpie I was going to put this in Myclub but I lost my eye and rushed it and then gave up. So I will leave it here. Lots of missing details… and the legs are cattywampus… the ridge line bothers me. But I just…
“How much air filtration do you want?” - “Yes” ------------------------------------------------------------------------------------ Giant Bagpack Airfilter for the PRUSA CoreOne using 250x370 mm IKEA FÖRNUFTIG HEPA- & Carbon-Filters (18…
UPDATE 2025-03-03: Uploaded STEP files for easier editing and ready to print .bgcodes for Prusa Core One and Prusa MK4S. The hexagonal case for GPIO Hackerboard You only need 4 pcs standard M3x10 screws from the spare bag:
Hier teile ich mit euch meine Grafikkarten Unterstützung. Ich habe sie so entwickelt, dass die Unterstützung die Lüfter am PC-Gehäuseboden überspannt (in meinem Fall 120mm Lüfter in einem Lian Li O11 Dynamic Evo). Gedruckt habe ich es mit…
I have constructed an adjustable graphics card holder. Adjustable graphics card holder for stable support of GPUs in various sizes. Easy to adjust and install, it prevents sagging and ensures a secure fit inside the case.
The mout should work with all Garmin GPSMAP devices (tested with GPSMAP 65s). The mounting holes are spaced accordingly (31x41mm, ⌀ 5mm). The mount is very tight initially, but it gradually becomes a little looser and easier to put on.…
3D printed Carpuride GPS holder, with holes for screws and nuts. Steel head bolts 6 hexagonal internal Ø5 x L.20 mm
Updated model to previous version I uploaded. This is a GPS mount for a 04 Chevy Tahoe. It slips into the sleeve on the dash next to AC control unit. Noticed on previous model that it was not entirely connected on the right side. This…
This is a simple magplate that i made for my Mp5 mags to make it easier to grab while in the heat of the moment. I have also included a version without the handle if you just want to replace the normal one. For printing i would not…
GEPRC Cinebot 30 GoPro mount with integrated mount for TBS M8.2 GPS module Remixed “Cam mount for GEPRC Cinebot 30 (Gopro 8 9 10 11 12 & DJI Action 2)” form Lenny B FPV The picture shows the part printed with Prusament PETG, 0.15mm, 100%…
Raspberry Pi GPIO cover. Only 5V power, Ground, TXD and RXD are accessible. So You can connect Raspberry Pi with your MK3S.
Distanzscheiben für Sigma Sport Navihalter, da ohne Scheibe mein ROX 4.0 kontakt zum Vorbau hat. Längere Schrauben ist notwendig → Original M3x6 (Senkschraube) Spacers for Sigma Sport navi mounts, as my ROX 4.0 has contact with the stem…
Simple remix of the V2 version of the hackerboard cover @StevePaterson made. I also printed my version on a textured sheet, to give it a consistent look. Printed in black PETG.
Pencil sharpener holder that prevents graphite powder from spilling when the sharpener is tilted.
Ein kleines Schild mit dem österreichischen Symbol für Einwegpfand zur Markierung von Körben, Kisten oder Boxen für das Sammeln zuhause. Es passt als Anhänger auf viele gebräuchliche Kisten und Körbe. Das Symbol ist 0,4mm tief geprägt,…
You need one insert, 6 wide switch brackets (black and purple in the photo), and 2 narrow switch brackets (yellow in the photo). Parts: (8) Omron SS-5GL2 snap switches Arduino Nano ESP32 (18) M3x8 socket cap screws (18) M3 heat set…
3D-Printed Adjustable GPU Support for NVIDIA & Radeon Graphics Cards Take your PC build to the next level with this 3D-printable GPU support , designed specifically for makers. Prevent graphics card sag while adding a touch of personality…
This simple and easy to print GPU Support is 8 cm(completely screwed, ~12 cm completely unscrewed)- and added a groove at the bottom so that a magnet can be glued to the bottom and it holds in place so much better. It's printing fine when…
Universal GPU support jack for PC cases, the total height can be adjusted between 80mm and 130mm. Update 28/09/2021 - Added a longer screw option, taking the total height up to 220mm. Print the base in the orientation provided, with no…
A GPS enabled Meshtastic® case for the Heltec T114 board with GPS module. Install the buttons, board, GPS module, SMA Pigtail and snap the 2 halves of the case together. Secure with a M3 screw for a rock solid enclosure. License and Fair…
Build a hall of fame for old graphics cards you have used! Prints on virtually anything without supports.
Pillar to keep your GPU in place. Should allow for around 8,5 cm to 9,5 cm tall. Print Settings Supports: No Resolution: 0.2mm Infill: 20%
Description Adjustable GPU Support Bracket This universal GPU support bracket is designed to provide stable support for heavy graphics cards, such as the RTX 4090, and prevent them from sagging or damaging the PCIe slot. The support…
This is a GPU anti sag support holder. It is designed to be as minimalistic as possible. It is intended to be used with Fractal Design Meshify 2 Compact case, but it can work with other cases close in shape and size. Similar metal-made…
Magpul Rail cover type 2 made in Fusion 360. This works just like the real thing, insert the base into an m-lok slot on your handguard, click in the "locktab" and its done. No extra's needed, only 3D printed parts. And best of all, when…
This is a cool case. Designed for Heltec WiFi LoRa 32 (V4) with GPS module support. Hardware: 3000mAh battery, PCB, antenna, GPS module. Three M2.5×8 self-tapping screws required. Personal use only. Commercial rights and custom design:…
Full Guide: Instructables The GP60 is a diesel-electric locomotive made by EMD in the 80s. It was used for freight trains and was known for its cab-forward design and improved fuel efficiency. Despite being largely replaced by newer…
Commercial Use and Attribution Notice: Alley Chat HT114 Pocket Pro © 2025 by Alley Cat and Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other…
Full Guide: Instructables The EMD GP7 is a type of diesel-electric locomotive that was manufactured by the Electro-Motive Division (EMD) of General Motors between 1949 and 1954. The GP7 locomotive scale model is a 3D printable and…
I have .3mf files with my settings I've used over at Makerworld . To split the model into each individual object: (In slicer) Right-click model → split → to object Designed for a full size ATX PSU and a dual PCIe bracket GPU GPU size…
You can use 1 or multiple of this screw to prevent wear on the PCIE slot for your GPU. It will not melt if printed in PLA.
Inspired by the flowing lines of muzi's H1 case , my case allows for the following components to be used in your Meshtastic setup: BME280 module for reporting temperature, humidity, pressure, air quality, ... Buzzer for audible…
This is a little threaded GPU Support i made in Fusion360. Adjustable from 56mm to 96mm. You can customize the height / thread length in the provided Fusion360 file.
This two piece print uses a screw to adjust height anywhere from a 90mm to 55mm gap between the GPU shroud and the case. Update: A few printers have expressed that the threads are tight. Be aware, depending on your print settings, you may…
Adjustable GPU Anti-Sag Support (8-12 cm) – 3D Printable Model Protect your graphics card from sag with this adjustable GPU anti-sag bracket , designed for seamless 3D printing and smooth height adjustment . This model ensures your GPU…
2024/02/17 Update : New design V105 for those who wants a tight fit : Ultra tight fit : making use of the screw holes of the WM2 to clip in, grips are making one with the computer body Standing mode : new stand and angle let me know what…
I designed this GPU fan adapter plate for the original XBox to allow you to use a 40mm fan instead of the loud and proprietary original fan. This will only work on the 1.0 version of the original XBox. If your XBox is a later model and…
This is a cool case. Designed for Heltec WiFi LoRa 32 (V4) with GPS module support. Hardware: 3000mAh battery, PCB, antenna, GPS module. Three M2.5×8 self-tapping screws required. Personal use only. Commercial rights and custom design:…
Necesitaba un soporte para la GPU y pues hice y personalicé uno, me gustó tanto que quiero compartirles, hice con varios logos. SIN LOGO ASUS Geforce RTX GIGABYTE Nvidia ROG Gaming Si desea algún otro logotipo me puede escribir y con…
Latest News: New Christmas Version! Print one of the vase option available here. Print the Christmas Lid available at this link: Santa Jack SkellingPot by Daniel Vitanza | Download free STL model | Printables.com 1. Introduction A vase, a…
This isn't just another functional piece of equipment, it's a statement of one's love for automobiles cast into a piece of tech hardware. Now, not only can you secure your GPU, but also express your love for cars through this special…
Print this with supports to the build plate only to handle bridging on the underside of the p-rail attachment area. PETG or PLA+ recommended for durability and heat resistance. Affixing AFG to Picatinny Rail: Vertically, you can affix…
Like it? Support me. Website: https://pixelglance.com Buy Models: https://cults3d.com/en/users/PixelGlance Summary This is Vertical Bracket for watercooled GPUs, and is perfectly fitted for the Lian-Li O11DXL-X PC Case. But it has also…
It's a Fan mount for 120x120x25mm fan that you screw in with standard fan screws. You can also print joints to add up a second 120mm FAN. That mount replace a 2x 92x92x8mm to a 120x120x25mm. It helped me to get 7C lower temperatures under…
28mm GPS mount for the GEPRC Mark5 and Mark4 FPV drone frame. The VTX antenna mount is for TBS-style antennas, and the receiver antenna mount is for standard T-antennas. My reason for using a 28mm GPS instead of the usual 18–25mm one is…
There are several problems with the original case, this remix aims at solving them all: - Can't enter dfu - Can't connect and disconnect battery - There is to little space for the battery (thickness) - The battery pushes onto the gps…
Newer 30xx and 40xx series Nvidia graphics cards (probably AMD cards as well) pack a punch, but with that comes extra size & weight. Most PC cases do not come fitted with GPU support hardware. This adjustable model should work for most…
This remixed part will serve as a replacement for the stock GoPro mount in order to provide a location for mounting 21x21 mm HGLRC M100-5883 GPS module on a SpeedyBee Mario 5 frame. GPS mount with GoPro v2: better fit and easier…
Printed cover to mount the Prusa GPIO “Hackerboard” to the frame. 4x M3x6 BHCS or SHCS to mount the board to the cover 2x M3x10 SHCS to mount the cover to the frame Wires route through the MMU pathway into the electronics enclosure.…
I couldn´t find any 3D printable models for the GP5 filter so i created my own one. The bottom part (bot) clips into the top part after printing. The top part should be printed with the thread pointing up. The bottom part should be…
Created GPS Mount after waiting for KTM Powerparts GPS mount (A61012992044) being on backorder. There are two file versions. One that fits the 890-R windscreen and the other for the S-model windscreen. The S-model version extends out…
This is a GPU Support that I designed to help prevent sag. It is simply placed under the corner of the GPU and extends to the bottom of your PC case and I think it looks pretty cool. I have included a large selection of sizes so just…
BN220 GPS mount for GEPRC Mark5 Allows the BN220 GPS module to be mounted on a GEPRC Mark5 with the TBS Crossfire configuration. Besides the BN220, it also houses the VTX antenna and the Immortal Crossfire T antenna. The VTX antenna and…
Universal GPU support The clearance on the screw portion is tight. Depending on your printers tolerances, you may need to adjust the size of the top screw to fit properly.
Remixed the original to fit triple slot GPU coolers. Height is adjustable in range of 66-82mm. Print in PETG or other temperature resistant materials like ABS, ASA, Nylon etc. It fits a Phanteks P400a with an Asus ROG Strix 3070
Reasons to make a remix: Added a low-profile base to decrease minimal height to 72 mm Needed a flat bottom for an uneven surface Angular design Configurations: Low profile base + short screw: 72mm - 108mm Normal base + short screw: 80mm -…
Cover for the Raspberry Pi GPIO pins, to prevent accidentally shorting them out when using a case (such as this one ) that leaves them exposed. This remix has a lip at the top for easy removal -- it's not a tight fit (assuming your…
This is meant to eliminate sag on the free end of your graphics card. The ones I found online were to flimsy for my taste so I made a bulkier assembly. Start with the screw and loosely thread the nut onto it. Then add the sleeve and…
Skadis-side only hook that makes other GP's models skadis-attachable. STEP file included.
3D Printed GPU Sag Support for Nvidia and Radeon Graphics cards. GPU sag is no longer a problem with the 3D Printed GPU Sag Support. the model is easy to print, no support is needed, and the model is designed to save printing pop and…
PLA or PETG Layer 0,2 Infill ~15-40% Minimum 65mm Maximum 105mm
Commercial Use and Attribution Notice: Alley Chat HT114 Slim Pro © 2024 by Alley Cat and Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other…
This is my first design of mount for BN 880 GPS and two sma connector from DJI air unit. Printed in Flexfill 98A with 0,4 nozzle at 0,2 layer height
Bei Fragen gerne Anschreiben, oder wenn ihr mir die Anforderungen für eure Probe schickt, kann ich dazu auch eine fertige Druckdatei hochladen. Für Creo .prt Datei Anschreiben. Die .gcode Datei ganz oben entspricht den Anforderungen der…
Demat, I had the idea of exhibiting some old GPUs to start my collection. I couldn't find a GPU support that I like so I designed one without a support to make printing easier. What do you need? only less of 30g of material and a little…
This remixed part provides a mounting for 25x25 mm BZ-251 GPS module on a SpeedyBee Mario 5 frame. As I don't own such GPS, please let me know if it fits.
This is adjustable support for GPU from 55 mm to 90 mm. I uplouded Fusion 360 files so you can modify it.
A simple support for your oversize gpu. I used to sell these on Etsy. I don't anymore, so I thought it would be nice to publish these for anybody to print themselves. Print with something that can withstand higher temperatures (ideally…
This is a remix from @massis to mount the Navimow's GPS receiver with a 90° angle.
The part accepts a BN-220 GPS module, a standard vTX pigtail with a flange mount, and standard 3mm antenna tubes (included with the Mark5 frame kit) Prints without support. Can be printed in PETG or TPU, depends on what you prefer. Photos…
This is a simple GPU anti-sag inspired by Sanguium's excellent design . However, I need something that can support 3.5 slots at about 53 mm total height which is far shorter than anything I could found. So I decided to make my own in…
An adjustable support to stop your GPU from drooping.
Print vertically for best strength. Rails might be too loose or too tight depending on 3d printer settings, use a hammer and/or glue if needed. :) Settings I used: 0.20mm layer height 15% infill Support for critical overhangs Filament:…
I've solved some errors in the lower part and modified the top part to have space to use the GPIO pins from outside and have the pin to fit a 30x30 mm fan without screws. The fan is oriented to blow air inside. I've removed the holder,…
I printed it in PETG with 40% gyroid infill and 4 perimeters and he “rubber interface” in TPU 95A with 2 perimeters and 20% infill. The rubber interface is a nice touch but definetely not required. If you have a round adhesive bumper pad…
Available in AMD, INTEL, NVIDIA and NO NAME initials. Minimum height is 50mm, maximum 79mm, diameter of the stand is 20mm
Height should be adjustable between roughly 60-80mm. I also changed the magnet slot to fit a 6*3mm(d*h) Magnet. Also the top part was modified a bit to be just round, i didnt like the “spikes” on that part. I also included a locknut, but…
This design replaces the original Prusa Core One Wifi cover. In a single cover it combines the Wifi and the GPIO interface. ACCESSORIES This part is secured with the original M10 SHCS screw The GPIO card is secured with 4 x M3x6mm SHCS…
Edit 02/21/2023: Added ver.4 & STEP files. Added holes for set screw (M3). Lost original ver.2 so named the updated one ver.2.1. Edit 03/17/2020: Added image with ver.3 Base plate/grip extension for 10 round MecGar 1911 magazines. I…
Custom magazine extension for magazine GL9 magpul Glock 17 + 2 extra ammo. The product is made in such a way that no screws need to be used.
The top/bottom layers are only 0.4mm thick, but the rigidity is not compromised thanks to the ribs. The whole thing can be assembled with four M2.5x8 screws. This model is designed to be printed with a 0.8mm wall thickness (0.4mm…
This is rambros ' excellent EMD GP60 model for Dragon Railway , remixed with a Norfolk Southern livery to print on a Bambu AMS. This contains the new files for the NS livery, the rest of the parts and full assembly instructions can be…
Intro: The motivation for this design was to build an eGPU with a $250 budget with used parts with a 10 liter maximum volume. At 165mm x 165mm x 330mm, it comes in at 8.98 liters. Full assembly guide here:…
Went for a brand new, shiny RTX card but don't want to say goodbye to you loyal buddy that kept you company in good and bad times ? Why not keep him close and give him a nice spot in your hall-of-fame with a cool display stand. All in…
I needed a mount for a single SMA adapter, an 18mm x 18mm GPS, and an XT60 connector. There was no such variant among the models provided by Speedy Bee, so I took the closest original model, which already had mounting for the XT60 and SMA…
This was made with an SFX power supply and AMD RX5700XT in mind. I highly recommend you use a gpu “blower” style cooler as it will be much easier to cool. During assembly, make sure the PSU fan is facing the outside, otherwise it will not…
5-2-2021 - Added Night City Police Department (Cyberpunk) Themed Rail and Slider 3 parts: Badge Slider - A , Badge Slider - B , NCPD Rail . Note ! Slider has to be assembled with small screws. 12-3-2020 - Added Phanteks Rail Custom GPU…
Printing Instructions: Materials: PLA, PETG, or ABS Support: 60-65 degrees (overhang) Infill: 10-20% Cubic INFO: My friend recently purchased the GPD Win 4 and needed a case, but there is none in the market yet other than 3D-printable…
This support for large graphics cards is the perfect solution for users looking for a safe and efficient way to keep their GPUs in place. Its extendable design allows it to adapt to different card sizes, from 52mm up to 72mm. Fits on any…
I wanted to use my Soviet era GP-5 gas mask for tasks that required particulate filtration (and because it looks cool). The original filter has several heath concerns around its use, so I decided to model a replacement shell to 3D print,…
Simple print that doesn’t change the way the magazine works except to add some more area to grip. The PMAG baseplase is almost a decoration unlike the Glock baseplate for the 10 rounders. So changing it is easy and it also isn’t really…
Hey there, I have created this model to upgrade my GPRC Mark 4 frame with the new DJI O3 air unit. I have made 2 Version: Version 1 with DJI O3, antenna and GPS mount: The bottom left and right part to hold the DJI O3 Air Unit in place.…
Precise universal model on GPU Stand For Mining Rig for different models graphic cards. Print Settings Printer: Tronxy Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 15% Filament: DasPrint PLA Category: Other
Enclosure for PCBv4.xSTD for AgOpenGPS. Enclosure has 2 removable sides, PCB can be inserted from both. This version is fully 3d printable. You can choose from many face and back plates available. But F9P users can only connect antenna…
Replacement follower for Magpul Gen M3 Pmag in .223 Remington / 5.56 NATO. Modeled in Blender, I included the .blend file. If you are looking for the baseplate, @mocobaco has one at https://www.thingiverse.com/thing:2646840 Category:…
Hey Everyone, Couldn't find a Ranger-Styled bottom plate for my PMAG gen3 so i made one. Fits the .223 PMAG perfectly as FDM or SLA print. Print it standing, so the sides where it connects with the mag are extra strong. I recommend resin…
Hi, I've made remix existing Geprc GPS mount and fit it to use with GEPRC Cinebot30. You can use it with two antenas RX and VTX. Best to print from TPU or other flexible filament.
Either print Black and Silver with dual extrusion (printing with 2 plastics) or print the Full version. You can, but it is very hard to, print this design in 2 colours seperately and later assemble them. I have seen someone do it.…
I used canopy model from GrabCad and tinkered simple mount for GPS. I used black PETG till layer 86, paused, changed filament to TPU, reduced temperature and printer the upper part with it. Came out nicely. But it can be fully printed…
![GPU Holder Max Pro 9000 [Parametric]](https://media.printables.com/media/prints/602760/images/6697680_da94602d-9c89-4674-8bb1-0f7bd3032deb_f41efe84-f920-447b-9afa-6015c269244b/20240508_125659.jpg)
![eGPU Thunderbolt chassis for EXP GDC TH3P4 + ATX PSU [165x165x330mm - 9 liters]](https://media.printables.com/media/prints/429812/images/3562411_ec2f4b23-3b18-464a-bc88-986318650ad4/screenshot-2023-03-21-182821.jpg)
