Counting matching models…
I've always wanted to design a nice fan, similar to the cooling fans that computers have. This turned out quite good in terms of both looks and performance. I was surprised that it was easier than I thought to get the right look. In terms…
Print approx. €1.94–€2.37 excl. taxPreliminary estimate for PETGSource material: PET
SUPER PINDA 1.5mm adjustment with 3030 MOUNT 1.5mm height adjustment tool to easy calibrate your SUPER P.I.N.D.A of your Prusa Mk3S+ / Mini+. Hold it on the 3030 extruded frame or enclosure with its mount included. Only 20 minutes to…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET
Spring 8mm X 20mm. Print in PETG with 0.1 mm layer height. No Supports required. I needed these for: https://www.printables.com/de/model/408942-sliding-legolini-pump-action-repeating-mini-bow
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
I know “just buy the addon then”, but I like designing in Fusion and am a DIYer so I came up with my own solution for an air extractor / filter box for my Original Prusa Enclosure (OPE). What I already had on hand was a 120mm 12VDC fan…
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant
GoPro Mount for STEELE 5 220mm fpv frame.…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
These are 3D-printed PVC pipe mounts, designed to be secured with M3 bolts. They are commonly used in electrical conduit installations and are available in different sizes to fit various pipe diameters. Perfect for mounting pipes to walls…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Habe hier ein Modell gemacht um einen Abluftschlauch für eine Klimaanlage durch ein Plexiglas nach draußen zu führen. Die Plexiglas-Scheibe hat einen durchmesser von 4mm und wird von außen/innen vor dem Fenster mit Klebestreifen oder…
Print approx. €1.74–€2.12 excl. taxPreliminary estimate for PETGSource material: PET
I tried a few trash bag holder / dispenser designs and they were pretty good. Ultimately I made this, combining the features I needed and avoiding the snags. Handle a variety of brands, roll sizes - especially larger ones (we usually use…
Print approx. €19.82–€24.22 excl. taxPreliminary estimate for one variant
These plates fit in the Milwaukee toolbox to organize your bench dogs. I modeled the inside of the organizer trays in the toolbox so the 3 plates fit perfectly. I then made 9 holes in each for 20 mm bench dogs. Simply print and drop them…
Print approx. €2.64–€3.22 excl. taxPreliminary estimate for one variant
Ender 3, CR10, Sunlu S8 and many more printers have 2040 or 4040 extrusion bars on which the z-axis stepper motors are attached. This univeral mount does: Allow you to align the distance beweetn the stepper motor and the z-axis (common…
Print approx. €5.34–€6.52 excl. taxPreliminary estimate for PETGSource material: PET
This is not an original Honda part or replacement for one, it is a custom part for better mounting of 20mm wide straps that end in a loop on the Honda CB1100. Make sure you have good layer adhesion and test the print, don't blame me for…
Print approx. €2.52–€3.08 excl. taxPreliminary estimate for PETGSource material: PET
I needed a few hooks for an additional rod in the wardrobe, this one is for 20mm / 25mm rods. Simply enlarge or reduce without any problems. The hooks are now of the size that they cannot be moved so easily, scaled to 102% in the Prusa…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
PLA Füllung 20% Schichthöhe 0,3mm ohne Stützen, ohne Rand
Print approx. €1.43–€1.75 excl. taxPreliminary estimate for one variant
The fan mount was designed to solve the issue of insufficient air conditioning and the need for cooling on hot days. Its minimalist design is all that's necessary for the fan to operate effectively. To secure the fan, you can use either…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
En petite section, à l'école , beaucoup d'enfants triturent leur trousse et en sortent quelque fois des choses innommables, ou même quelque fois la même couleur de stylo que celui qui sert à la correction du professeur… Ce plumier collé…
Print approx. €7.12–€8.70 excl. taxPreliminary estimate for PETGSource material: PET
This mount slides into the channel of the 20x20 V-Groove Extrusion. You can slide an M3 hex nut or square nut into the pocket of the mount and then bolt threads into that.
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
A 20mm diameter button in metric units. Flat face with a filleted rounded triangle shape and a wide ridge.
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Caution there a different sizes of those legs. Mine was 20mm wide and 26mm long.
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for PETGSource material: PET
I designed this Fanshroud to make my RTX2080 quieter. The Shroud lets you mount a 120mm Fan into the 90mm Fan mount. The Fanshroud screws into the existing Fanmount Per Shroud you'll need: M3x6mm Countersunk Screw x3 M3 Nut x3 (Optional)…
Print approx. €5.56–€6.79 excl. taxPreliminary estimate for one variant
Compliment your rugged PC build with textured fan side clips. I used silk PLA to give a metalic effect. I have included models for 120mm and 140mm fans. Printing I used 0.15mm layers for a clean texture. 0.20mm would look similar and save…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
Based on the idea of the user Sneaks i made a measuring tool for metric screws. This tool can measure M2-M10 screws with a length of 4-120mm Printing instructions: 0,15 mm layer height no supports infill 15% rectangular infill 2…
A test cube with measurements of 20mmx20mm
Custom-engineered for optimal performance-to-noise efficiency in use with the Noctua NF-A12x25 fan. Carefully optimised to ensure smooth pressure gradients as the fan blades pass the radial struts, resulting in higher airflow performance…
XYZ Calibration Cube 20x20x20mm
iDig3Dprinting Calibration Cube < link >
A fan grill for a 120mm PC fan. Designed in Fusion 360.
These are T-Nuts for the common 20x20mm Aluminium Extrusion profiles many printers are made of. I designed them for my Profore Original 3D-Printer to attach things like cable clamps etc. While designing, I learnt that the profiles look…
UPDATE 2024-05-29: Updated to V2. Added 140mm version and uploaded the source file. Parts to make a 120mm or 140mm PC cooling fan into a desk fan. A single M6x30 Hex bolt and M6 nut connect the fan to the stand. With an option to embed…
A mini skid steer digger 20mm in width. Scratch remodeled version of “Gophergames” Skid Steer to fix model geometry issues, resized to 20mm, done in Solidworks. Because the 10mm version is a choking hazard for small children this bigger…
I always struggled with drilling the holes for wall mounts and pictures. With this handy tool, you can measure the distance between the holes of the thing you want to mount and can lock it in place with the knob. To achieve the perfect…
The listed diameter in file names refers to the inner diameter of each piece, allowing precise cable organization. When printing, be sure to add a brim at the base to ensure secure adhesion to the print bed. With the Prusa MK4S, no…
A test print file exactly 220x220mm with a height of 0.2mm (one layer) to match the Creality Ender V3 KE's build plate, with squares at the points where the auto levelling sensor touches the bed. This has the bonus of allowing you to…
These fan spacers can be used for 120mm and 140mm computer fans. Both fan size spacers come in three thicknesses: 10mm, 15mm and 25mm. The mounting holes are chamfered on one side and recessed on the other. See the second image for the…
This is a fishing lure I have been designing and upgrading for a while now, it uses 6mm ball bearings for weight, stainless steel wire for line tie and rear hook hanger, and a swivel for belly hook hanger. Checkout LureForge , the…
I like my jumper cables to have a tight fit, so i adjusted the lenghts and turned it into a single print object. The Skadis hooks can be pushed into the dovetail connection, but be carefull when inserting them, because it is a very tight…
UPDATE May25-2023: Added additional files for printing main canister portion on smaller printers. Split canister sections also have 3mm holes to help with alignment during assembly. This is a full sized printable model of an M829A1. The…
A 3D Printed Fan Cover / Mesh Filter. Prints out single straight lines criss crossing. See close up pictures. It is memorising to watch it being printed! Do a colour change on the first and second layers in your slicer to add a shimmering…
This is a remix of Picatinny Rail Riser 20mm by DNeves . An airsoft Picatinny rail riser to set accessories such as red dots and scopes 20mm higher. Remixed to fix rail width and include M3/M5 slots. The original model had a great design,…
Disclaimer: Before you start doing anything with electrics, make sure that you understand what you are doing and comply with all conditions for your safety, the safety of others, as well as the safety of equipment.…
This is an adapter to connect a 120mm PC fan to a 4 inch duct/pipe/dryer hose. I know there are already models like this out there, but I always find something I wish was done a little differently, so here's mine. It has the following…
I needed more places to put hard drives in my home server. I found the mounts by sk_2002 and xcooling, but after printing the 4 bay version, I realized that my case had a 140mm fan mount on the bottom. some redesigning in sketchup, and…
This is a cover for 120mm PC cooling fans with an angular louvre vent design. Besides looks, this fan grill also saves fingers ;) I'd suggest using support material to improve the print quality of the model. If you feel adventurous…
The rugged box measures 110mm x 220mm x 75mm, providing a durable and practical storage solution. Designed with integrated slots for metric nuts, it ensures secure assembly and enhanced functionality. Its compact size and sturdy…
A 120mm fan bracket for 3x 5.25 inch bays. It mounts with M3 screws just like an optical drive or other 5.25 inch bay accessories. This is a slightly refined version of https://www.thingiverse.com/thing:2446552 , with many dimensions…
All fans have 4.2mm screw holes and fit within the dimensions of a standard fan. Screw spacings are also standard. 80mm, 71.5 hole spacing 120mm, 105 hole spacing 140mm, 124.5 hole spacing The Hexagon pattern is 12mm hexagons side to…
Calibration test-cube for 3D printers X, Y & Z written on the axis. ////////////////////////////////////////////////////////////////////////////////////////////// Note that I recommend calibrating the extruder before proceeding with this…
A very simple connector for elastic garden hoses. It's designed for hoses with an inner diameter of 20 mm, so if you're connecting hoses with a different inner diameter, you need to scale the model accordingly. Recommended print settings:…
Just your average XYZ cube with a few extras.
Since I saw the model of NBA, I had the challenge of creating it myself, it was done through Fusion 360. It is a basketball which is not filled with air, has a hollowed design and comes in two sizes. The first file contains a 120mm…
This model was designed for outdoor use and as such was printed with PETG.
This is a simple soldering fume extractor. It uses an active carbon filter commonly found in hardware stores and used also in your kitchen fume hood or in cat toilets. The design is quite simple, no need for screws or anything else. All…
I designed this conversion adapter to mount a 120mm fan I had on hand because I didn't like the appearance of the stock fan included with the AXP90-X47. Required other than printed parts: 4x M3x5x4mm heat-set Inserts 4x M3 screws,…
There is a new revision B of this project , with more pipe diameters and additional wall mount distances. Unless you like to print exactly this version of the clamps, please use the newer versions with an improved geometry. Check out the…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 Design These items are made to fit to standard 120mm fans commonly made by computer, chassis and rack fan manufacturers to connect to a 100mm flexible ventilation pipe with a clamp. There are two different looks available.…
M3 Screws, Length 3mm-40mm All made in Autodesk Fusion360
Pipe fittings Elbow Ø16mm / Ø20mm / Ø25mm Hexagonal Shape - Gomiti di raccordo tubi forma esagonale Piping and Fittings for Installations for PVC Electrical Conduit 90 degree Ø16/20/25mm 120 degree Ø16/20/25mm 135 degree Ø16/20/25mm 150…
Tips are appreciated and go towards creating new designs README I have created this set with dogs of 20.0mm, 19.9mm, ~3/4'' / 19.0mm and <3/4'' / 18.9mm diameter. Just check my uploads and find the set you'll need. This is the 19.9mm set…
A radius measuring set (for both inner and outer radii), designed to fit within a 1x2x3 Gridfinity box. Notes: I didn't include 1 mm radius because honestly, I don't think it's really needed. The individual pieces default to being printed…
Cconduit / pipe snap-in clamp. single screw tested with 30% infill and 25mm conduit Print Settings Printer Brand: TEVO Printer: Tornado Rafts: No Supports: Yes Resolution: 0.2 Infill: 30% Filament: no-name PVA white Category: DIY
It's a Fan mount for 120x120x25mm fan that you screw in with standard fan screws. You can also print joints to add up a second 120mm FAN. That mount replace a 2x 92x92x8mm to a 120x120x25mm. It helped me to get 7C lower temperatures under…
Fan mount for passively cooled Nvidia Tesla K40 and P40 GPU's. designed to work with dual GPU's.
The NA-FMA1 fan mounting adaptor permits the installation of the NF-A12x25 and several other Noctua 120mm fans on 140mm watercooling radiators (or other screw-mount applications that are designed for 140mm fans, e.g. as a case fan).…
Wanted to add some options for 3D printing case feet for the NCase M2 to give a classic mounted GPU more airflow. They reuse the screws that come with the case, and can be printed in 10, 15, and 20mm heights. If you have SolidWorks, you…
Reduce noise PC fan spacer 120mm / 140mm 5mm thick
Overview: This is 3D-printed desk fan, designed to seamlessly blend functionality and style. Built around a powerful 120mm computer fan, this versatile device is perfect for keeping you cool or for fume extraction during soldering and…
Mounts to a standard 120mm fan and the other end fits inside 3 inch aluminum flexible ducting. Mount holes to fan are size M4. Print instructions Category: 3D Printer Accessories Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts:…
Extends the profile of the AOOSTAR R1 and R7 2-bay NAS PCs to add a 120mm fan. I split off the CPU fan header (with a standard PWM fan splitter) as the chassis header doesn't support PWM and outputs 12v continuously. Screws into the…
After looking through a few different models online, I decided to create my own sink sponge holder and include some perforated holes that allow any water to easily drain away from the sponge - preventing moisture build-up . This was…
Application The double D-ring buckle for strap webbing is not the fastest to close, or the easiest to open. But it is the strongest there is to my knowledge (see video at the bottom of this page). If you need a quicker or more convenient…
I remixed deLamorDesign's espresso knock box to change the dowel diameter from 0.75 inches to 20mm, and increased the box diameter from 100mm to 120mm. When slicing this I added a modifier region to set the infill percentage to 50% near…
For a detailed guide on how to put this together, please visit our article here: https://www.corsair.com/explorer/diy-builder/cases/3d-printable-hard-drive-cage/ TL:DR - We have made two versions: Infinirail version - fits FRAME 4000D…
Calibration cube with a city on the inside. There is a lot of fine details to test your printer. Mine just looked like some spikes in a cube. Print Settings Printer Brand: Monoprice Printer: Mini Delta Rafts: Doesn't Matter Supports: No…
Another fume extractor. I looked at what was available and made my own. I took the idea of a slotted housing for the filter from another design and then built that and everything else around the fan body. Fitting the wiring into the…
I made a remix at my friend's request. maybe it will be useful to someone.
This is a dust filter for a variety of fan sizes. The printed mesh blocks dust and debris from getting stuck in a fan. You could add a colour change in the second layer to create a beautiful effect. Make sure you are printing with a 0.4mm…
UPDATE 2025-05-26 : Added “100mm-tube-connection”, to be used with https://www.printables.com/model/1337372 for ducting to IKEA UPPÅTVIND! UPDATE 2023-01-09 : Added the possibility to use a filter on the inside of the cabinet…
This 2 piece fan duct can be used to limit/direct the direction from which air is sucked into the fans or blown out. Once the fan plate and fan duct are printed, they can be glued togehter. I used super glue, which works fine. You could…
Prop 20mm aircraft ammunition with printed ‘brass’ shell and projectile. Very closely matches old Air Force M56 20mm ammunition. This is a two-part model with a shell and projectile. Projectile models include 3 or 4 color changes…
120mm fan grill 6mm thick, with 4mm clearance between fan and grill. Compatible with regular self tapping screws like used on computers ------ Support me on Patreon ! https://patreon.com/squirrelf3d or buy me a coffee…
3 Way Pipe Connector for 20mm pipes. Tight fit so that no glue is required.
I needed a way to get some fumes out of my garage without opening the door all the way during the winter. I designed this duct to attach to a 120mm fan so I could attach some flexible ducting to it with a hose clamp. I opened the door…
Hello! Here is my design of air filter/fume extractor for my enclosed or not printers! I designed it for these HEPA filters: https://fr.aliexpress.com/item/33037955841.html?spm=a2g0s.9042311.0.0.27426c37H91RYB And finally I decided to use…
I needed to cool down my 2x10Gbe Ethernet card, NVMe drives and SAS card.
This is a conversion for the Wind Ace Wind Simulation for Sim Hub that converts the back so it takes a 120mm fan. There is an adapter for the body so a fan can be fitted and then a rear flow guard for the back. I used the GDSTIME GDP1238…
I scaled up Chris Borge's fantastic Kirby fume extractor model to fit a 120mm fan! I modified the fan bay fit so no trimming should be required for a 120mm fan. Options are available for using screws or heat set inserts to secure the fan.…
I originaly intendend this propeller to fit for my DIY electric SUP-board motor but you can use it to drive what ever you want. this design fits on 10mm D shaft but you can easily modify the design to fit any other type of shaft. Keep in…
Brackets for joining 120mm fans together. Join fans in many configurations for different applications
Tips are appreciated and go towards creating new designs README I have created this set with dogs of 20.0mm, 19.9mm, ~3/4'' / 19.0mm and <3/4'' / 18.9mm diameter. Just check my uploads and find the set you'll need. This is the 20.0mm set…
UPDATE 1/29/20: Design update to v2! Thanks to input from members here I reworked the stack so the fan is now in-between the HEPA filter and the carbon chamber. This means the fan is now pushing air through the carbon rather than pulling…
Einlegesohle, Schuh Erhöhung, 2,5mm, 5mm, 10mm, 12,5mm, 15mm, 20mm, 25mm, Größe 42 Gedruckt in TPU, kann natürlich auf andere Größen skaliert werden. ----------- Insole, shoe elevation, 2,5mm, 5mm, 10mm, 12,5mm, 15mm, 20mm, 25mm, size 42…
I wanted to be able to quickly connect and disconnect my 100mm duct to the 120mm fan of my engraving housing so I created this twist lock connection set . duct for 120mm fan 100mm duct hose (with a notch for optional attachement of a zip…
This remix was created for reasons when you use these compartments from the original model, for example in a drawer, but there is some free space left on the side. These models are 20 mm longer in one direction than the source models: “…
Boilie rollbar for making 20mm boilies used for carp fishing. You can see how it works here . You can also print 16mm version from this link . Specs: Dimensions of this tool are 15x17 cm (height of the tool is 49mm). You can stretch…
I made two fan grills for my Lack Enclosure, one for a 60mm Noctua NF-A6x25 PWM and the other one for a 120 mm Noctua NF-P12 redux-1700 PWM. Those will probably fit most 120mm and 60mm Fans
I very often use an XYZ calibration cube, but after checking the surface and measuring the dimensions, it became a waste. So from now on I will use this D6 dice as a calibration cube. Figure 6 is Z-shaped, the X-axis is 5 and the Y-axis…
In Germany its very hard to find 19mm outer diameter pipe. So I decided to make a 20mm version. The holes are 20,5mm diameter. First try with 20mm holes was too tight and difficult to assemble. I recommend to print first the test part to…
Fedezze fel a kazánkészési évenkénti! Az új, 3D-s nomatt kazán földrajzi árukkal együtt egy célunk, hogy minden horgász könnyedén és pontosan elkésett sajtsa. Az innovatív tervezésnek és a csúcstechnológiának megfelelő kiegészítőnek kell…
I designed this Adapter to Mount a 140mm Radiator on a 120mm Mount. I can also be used to Mount an 120mm Fan on a 140mm mount. Made an Test_ Piece as request. Instructions .2 mm Layer Height .8 mm Shell Thickness .6 Bottom/Top Thickness…
![Lockable hole distance measurer with scale (20mm - 200mm) [v1.1]](https://media.printables.com/media/prints/644202/images/5085947_ae90008e-8660-4752-9160-1b9f4a3444cc_1ea70f13-8190-4920-bd57-67c307f5b7f8/dscf8816.jpg)
