1,000 models
Print in PLA so you dont damage the printbed. Check out the new larger model at: https://www.printables.com/model/291609-bed-scraper-mk2-8g-25min Still uses only 8g and prints in 25min. Print instructions Click print =)
This design supports material from 5-15mm thickness. The clamps are more easy to handle than angles with seperate clamps, but will only support joints of equal thickness material. Concept is based on idea of takuwoodcraft / TWCDesign.…
I printed a set of these but found them to not fit my Razer Blade laptop and also being a bit large. The angle the laptop gets with the original stand made it uncomfortable using the keyboard, I just wanted a very slight lift to help with…
This attachment enables a spray can to spray a stream of Oil/Wax or Brake-fluid directly and only to the chain (i.e. avoiding overspray onto bike frame , tires and disk rotors) , less mess, less waste and more time to ride…….. I am blown…
I have an insider corner above my workbench where I am putting up a multiboard. I couldn't make any of the premade brackets work for my needs, so I made my own. These are working for me and can be seen in the attached images Updated…
Print-in-place toothpick crossbow with compliant mechanism. No assembly, fits 3 spare toothpicks, 15m+ range! Mini Toothpick Crossbow – Print-in-Place Compliant Mechanism (+15m Range!) This is a compact, incredibly fun, and functional…
A set of simple tried and tested pipe insulation cutting templates. I was sick of doing it by eye and then noticed people selling similar online but they were either overpriced or a bit "janky". I spent a fair bit of time sorting these…
This print is a conversion from now mostly useless optical drive bays (discs/DVD/CD bays), AKA 5.25" drives. The adapter will fit up to 4 2.5" drives instead and can fit all standard formats (so each of the 7mm, 9.5mm, and 15mm thick…
Intro Sometimes a print may leave little marks on your print bed - some of these marks are hard to remove even if you use a print bed scraper. This print bed cleaner will easy the removal of all those annoying marks. Why you'll love it?…
To be printed on its side If you will print this model, please post a make. Thanks! P.S. Thinner remix exist to fit US Skadis: https://www.printables.com/model/975385-skadis-hook-115mm-na-skadis
After looking through a few different models online, I decided to create my own sink sponge holder and include some perforated holes that allow any water to easily drain away from the sponge - preventing moisture build-up . This was…
Dieser Anschlag ist für Metalllineale mit den Maßen 15mm x 1mm (Breite / Dicke) konstruiert. Er lässt sich problemlos drucken, keine Stützen etc. Es wird auch kein zusätzliches Zubehör benötigt. Weitere Größen sind unter meinem Profil zu…
Ive designed something to clamp over the existing guard on a bosch 115mm angle grinder then clamp your angle grinder to a bench to sharpen 12mm, 10mm, 8mm, 6mm, 5mm, 4mm drill bits 2x 90mm 8mm bolts & nuts required. mine are my usual CF…
To help reduce the chances of yarn snagging on your hook, I recommend printing at the lowest layer height you can. Some sanding may be needed, but for me wasn't needed. Happy crocheting! Layer height 0.12 mm Infill 25% Wall shells 3 PLA…
BOM: Printed with ROSA3D High Speed PLA Gray Save yourself a trip to the hardware store! This is a complete set of classic, nail-in cable clips for routing wires along baseboards, walls, or door frames. Key Features: Nail Compatibility:…
I needed a simple nut for the PC4-M10 PTFE coupling when making a drybox. Nothing fancy, created in OpenSCAD with “Nuts and Bolts v1.9.6 OpenSCAD library” by biomushroom that you can find here: https://www.thingiverse.com/thing:965737…
Mechanic Parts Tray 145x170x15mm - Mechanic Stuff It is ideal for storing small parts or screws, for garage, maintenance, or DIY Overall dimensions: 145x170x15mm The model may be imported as a single assembly or grouped object. Before…
This is an alternative nozzle for a Turbo Fan/Jet Fan, featuring much higher nozzle pressure than the stock version. In my opinion, it offers the perfect balance between pressure and airflow. There's a small notch on one side, which…
Einlegesohle, Schuh Erhöhung, 2,5mm, 5mm, 10mm, 12,5mm, 15mm, 20mm, 25mm, Größe 42 Gedruckt in TPU, kann natürlich auf andere Größen skaliert werden. ----------- Insole, shoe elevation, 2,5mm, 5mm, 10mm, 12,5mm, 15mm, 20mm, 25mm, size 42…
As a wish of the DISCORD dungons channel the Small portal for TTRPG terrain prints without support at 0,3layerheight 15min no infill CR10 0,2 35min 6mm zigzag infill 2perimiter 2 botton and 2 top layer HAVE fun
Description: This is a remixed version of the original drill bit sharpener, redesigned to fit a 115mm diameter grinder. It offers a compact and efficient solution for sharpening your drill bits with ease. Printing Configuration: Material:…
A bit of an experimental BCAR with agressive twisting for sticking inside DZ Muzzles or on the outside of 15MM OD aluminium tube
This parametric strap adjuster is set to 15mm, but can be adjusted to plenty of sizes by changing the parameters in the Fusion 360 file!
I needed this one, the others I found on Thingverse and here, where a bit crap. It has a description on the inside. I made it so it prints without supports. It is also correct up to 1%. (Although I didn't account for the letters) It is 1…
This is a work in progress for the NR200- adding a side panel extension that's 3D printable to allow for taller CPU coolers like the NH-D15. Currently my designed clips hold the side panel 15mm out from the side (extending the 153-155mm…
I was tired of paying a lot of money for a really nice, and light weight Mattebox for a gimbal or steadicam So I made this! Hope you like it, I worked really hard on it. Print instructions Hey friends! I moved this over from Thingiverse…
Design allows you to snap them into place without having to de-rig everything. Fits smallrig, but will fit any 15mm rail system where they are 60mm apart. Just added a model that makes the rails sits 0.8 inches higher. Some people that…
Little contrabtion to make the festival bands reusable without damaging them and having them tight and adjustable.
Update 2023-12-10: I added a nice 3-fold stand to this storage system. It has the same bayonet closure as the jars, so that they stand securely. Please download here . This is the 115mm jar of my new “ Stackable Jars ” storage system. You…
Stepper Motor Nema 23 length 41-115mm shaft D8
This is a 15mm Ball-Hinge-Ball joint for use in the Substratum figure building system I will be utilize in my projects. It should be simple enough to print but the dowel might be a bit hard to insert at first, this is in order for the…
This pushes the outer limits of the X1C's 256mm bed. It's 250mm in diameter. If you're a perfectionist, pause the print and remove the purge lines before letting the first layer go down. It's easy enough to trim it off if you don't. I…
(English below) Um die Starlink mini im Wohnmobil über 12V betreiben zu können, habe ich mir ein kleines 12V Netzteil für den KFZ Zigarettenanzünder gebaut. Damit lässt sich das original 15m Starlink Kabel weiterhin verwenden und es kommt…
Gridfinity bin for Dremel It has a 1x2 bin footprint. Used for Dremel spanner, chucks and standard 3.15mm (1/8") tools. I really needed a bin with both spanner and tools, and figured I'm not alone. There's no lip on the bin since You…
Bolt 3 metric, star, thor, torx, nut, plain Bolt 3 metric, star, thor, torx, nut, plain. Lenght: 15mm Diameter: 3mm
Complete set of M20 cable glands for 12mm and 15mm inner diameters, including 2-7-wire inserts (1.5mm² & 2.5mm² versions), reducing inserts (3-13mm) and a gasket for reliable sealing. Also includes an M20 plug compatible with the gasket…
I needed some quick and easy buildings to play Gale Force 9s Tanks:Modern Age So I modded a few of my 1/285scale buildings and one of my 1/48scale buildings and these are the result Edit:2019-07-09 - Thickened walls on Small 3 level…
Remix of the amazing Pegstr - Pegboard Wizard by mgx for use with pegboards with 4mm holes, 15mm spacing between holes (measured from middle of the holes or 11mm from edge to edge). In my case the board was just 2,5mm thick, but you can…
Das ist der Nachfolger (v2) meiner Radiuslehre 01-14mm. Das Problem dass keine 90 Grad Ecken gemessen werden konnten, wurde hier behoben. Die Daten sind für den Druck mit einer .4mm Düse und einer Schichthöhe von .2mm optimiert.
My space in our lab fridge is a mess – many times i had to move out all the tubes in order to get the only one that I was looking for. They were lying flat, stacking on top of each other. So I designed this tube holder. This helps me to…
Nozzle Mount Adapter for an ADXL with 15mm hole distance. BOM: (3mm holes in bottom plate) 2 M3 Heat Inserts 1 M2 Heat Insert 1 M2 Screw BOM: (2mm holes in bottom plate) 3 M2 Heat Insert 1 M2 Screw
A little fix to the original model to work with North American Skadis boards. For some reason the original model was set to 5.2mm width which would not fit the Skadis without adjusting it. This model is sized correctly for the North…
Extension for Mitutoyo caliper gauge (Tiefenmesser) made for MITUTOYO Digital Absolute 150 mm IP67 Input / idea came from @jackenhack but this 3D model does not fit to mine Mitutoyo caliper gauge, so I need to redesign the full model new.…
The factory HDD caddy for the Dell OptiPlex 9020 Micro only fits a 9mm drive. This is a custom version designed to fit a 15mm drive. I’m reuploading this to Printables so more people can find it, as it took me three hours to discover that…
115mm Angle grinder dust cover Bosch GWS
I needed storage crates for a specific cabinet which were larger than my Bambu build area (250x250mm). This crate prints in 2 large pieces which are joined by 4 pegs. The base has a small interlocking bevel to seal the gap and add minor…
Soporte para sujertar la varilla de cortina de 15mm de diámetro
BOM: Printed with ROSA3D High Speed PLA Gray This "Micro" set completes the collection, offering mounting solutions for very small diameter tubes. These are perfect for organizing small copper pipes (gas/hydraulic lines), PTFE tubes for…
This remixed part will serve as a replacement for the stock GoPro mount in order to provide a location for mounting 15x15 mm HGLRC M100-MINI GPS module on a SpeedyBee Mario 5 frame.
Welcome back guys! I made this model a whole while ago and decided to release it now! It's the longest 3d printed sword I have seen, its 2,15m long! READ THIS BEFORE PRINTING This is a model just for fun to show of . The retracting blade…
Screw clamp for Whale Marine water pipes. Takes larger screw than genuine clamp.
[EN] You can find the description in English below [ES] Escuadras de Ensamble en X y T para Melamina de 15mm Estas escuadras de ensamble en X y T son la solución perfecta para quienes trabajan con melamina de 15mm, proporcionando una…
Made for my Ryobi 115mm cordless angle grinder but I imagine it should work with most 115mm or smaller grinders. I've also made extra parts to hold the handle and the wrench. All parts mounted with 10G x 30mm wood screws into standard…
Printed template for DIY small 868MHz / 915MHz antenna. Total size 26x6mm alternative to 160mm dipole. Use 0.7mm wire to make the antenna spring. Use coaxial IPEX4 antenna cable, solder active, central wire to the spring (no passive part…
This is a smaller version of Dual Rotary Encoder from FlightSimMaker. EC11 15mm round shaft. Update 2021-12-11: Added CRS Knob Added new Knobs with more details (V2) Added new Case with mounts (V2) Print Settings Printer Brand: Prusa…
Modelo de un clipper guard para maquinas wahl que te deja a 57.15mm o 2 ¼ in
What is it? Sanding block with a 115 mm width to match common sand paper roll sizes. It has two knobs to easily release a sand paper for quick replacement. Holding a large block on it's own might not be as comfortable so it has a handle…
115mm and 95mm plant pots
A remix of Prusa's RC3 USA 3-post face shield with: 15mm z-height vs 20mm for Prusa's (quicker print and 25% less material with minimal impact on durability) improved comfort near ears via 7.5° flare filets instead of chamfers to reduce…
Anglegrinder holder for the modular wallmount. 2 pieces, you'll need m4x15 screws to put it together. Baseplate and description: https://www.printables.com/model/202771-modular-wallmount-system-for-various-powertools
large shelf of 200 x 115mm. for honeycomb wall
Coupris Kineema from Disco Elysium . Based on the concept art and the in-game model, then simplified a bit to make printing easier. I am using it as wargaming terrain, but I think the model is detailed enough to work for dioramas as well.…
This 3D printable model is a reducing adapter designed to seamlessly connect ventilator circuits, such as CPAP hoses, with different diameter requirements. It allows for the adaptation between adult and pediatric hose sizes, featuring a…
Milwaukee M12 Battery Holder Pegboard 15mm grid (center to center).
I printed this to use in building the Digital Sundial, http://www.thingiverse.com/thing:1068443 Customized version of http://www.thingiverse.com/thing:193647 Created with Customizer!…
15mm Clamps for the pneumatic pipe system from Schneider AIRNet
15mm and 30mm extension if you need to bring the Kickboard/plinth more forward
15mm Rod mount for the DJI Focus Pro Lidar Mount. Uses 2 M5 Nuts, 2 M5 Screws, and the screws needed to mount the Lidar Sensor. Once you've printed the 2 parts, insert the M5 nuts in the recess, then slide the top of the bracket over (you…
Prints in under 15min FDMready NOinfill NoSupport HAVE fun This is a complete new modell despite so many Easter egg PLEASE see all the other 600 creations here FREE available https://www.printables.com/@Magig_I3Prusa/models
Schablone zum fräsen von Fingerzinken mit 15mm. Für bretter bis zu einer Stärke von 30mm Wer weiß, wofür man dieses Werkzeug braucht, weiß auch wie man es benutzt, desshalb hier keine Erklärung : ).
Gardena Micro-Drip Irrigation 0.5 inch (15mm) clamp stake
I remixed the original Prusa RC3 headband to make it only 15mm tall and I also flared out the tips to improve comfort. Having tried on the RC3 headband, the ends always put too much pressure against my head. I found out that by spreading…
ENGLISH VERSION AFTER Questa è una versione in foglio di acetato A4 (verticale e orizzontale), con 3 asole di AUTO BLOCCO per fascia elastica da cucito di altezza 15 mm. Suggerisco versione orizzontale per Infermieri e Medici che…
I've tried other 15mm to 19mm adapter and they usually work well. But I had a problem once with the adapter being a little bit to lose so I made my own with no tolerance. the inner diameter is exactly 15mm and the outer diameter is…
Cute set of 4 dog keyrings that are perfect for keys and gifts. Prints in just 15 minutes! Tips: - Use color / filament change in your slicer software to achieve multi color, no MMU or AMS required. - Like and follow for good luck! Follow…
Staircase tube rack. Rows have differing elevation for easy access to each tube 2x6 15mL conical Falcon tubes, 2x5 50mL conical Falcon tubes. Holds a total of 22 tubes. No supports needed. Base is mostly hollowed out to decrease amount of…
This is an approximation of the REV Robotics 15mm extrusion. It was created to support build activities of FIRST FTC Team #13599 Bruinbots for their 2018 season. The OpenSCAD file is attached for your use and improvement. There are pieces…
0.1mm layer height. infill 20%. outside diameter 56mm, inside diameter 30mm, diameter for axle 2mm.
Easy to print cable holder for the cleanest of camera builds. Cheers!
This is a remix of Rain barrell overflow 1'' hose adaptor (by Toqisek ) and Hose Connector / Adapter Set - Gardena (R) Quick-Connect Compatible, 3/4" Faucets, and 1/2" Hoses (by guppyk ), both on Thingiverse (Printables doesn't let me use…
Combo Wrench Holder Pegboard 15mm grid (screw version) (e.g. Proxxon Set) I adapted it to a 15mm Pegboard grid with 6.5mm holes for 6mm screws. I cut 6mm threads into the 5mm holes to use 6mm metric screws.
Niimbot label cases for 25mm and 12-15mm wide tapes.
Reduced height to 15mm and added stacked .stl file with no support so users can generate their own support when slicing. Print instructions Printed on a Creality CR10S Pro with 1.75mm Botfeeder PLA on the following settings for Cura…
Introducing a highly efficient and economical print-bed scraper designed for rapid production. This scraper takes only 15 minutes to print and uses minimal filament, thanks to its strategically placed holes and cutouts. Despite its low…
I needed a HDD/SSD holder to hold the max drives I could fill on the Prusa Mini print plate, so remixed this Fits 15mm drives
Milwaukee M12 Charger Pegboard Mount for a 15mm grid
I printed in petg , flat side down, working well on 15mm square pegboard.
Basic scuba diving spool ideal for DSMBs It can store up to 15m of 1.5mm line
15mm Tall Version of the RC3 headband. I even found a chamfer that Prusa missed on the bottom of the headband.
This lets you fire the 15mm flares or scare cartridges (screamer, whistle, banger etc) from a 37mm launcher simultaneously. there is a slot for a rubber band that will hold them in place so they don't all fall out if tipped. you simply…
Backstory: I ordered a datacenter Intel U.2 SSD before receiving my MS-01, only to realize once it got here that it didn't fit, with the ms-01 only supporting 7.5mm drives. I'm by no means a professional CAD designer and would like to see…
I was having difficulty finding a replacement lens hood so I put one together in Design Spark. This hood will work with the Panasonic Lumix Leica 15mm 1.7 or the DJI white-labelled version. Printed solid at 0.2mm layer height, 0.4 nozzle…
Very simple model, I just made a series of boxes and slid them around until they matched my measured dimensions on the silverware. The Right-most area is left open at the top for longer items. There are a couple mm to spare on the sides,…
Eclipse NVIS Antenna 40m 20m (15m) 10m this antenna is meant to be an all in one package for emergency NVIS communication. can also be used for POTA for those local QSO in your skip zone. the goal is quick deployment, lightweight and…
filament: PLA height layer: 0.2 speed: 120mm/s
A 3D printable adapter that connects standard soda bottles (PCO-1881 threads) to 1/2" (15mm) hose barbs. This adapter screws onto standard plastic bottles (like soda bottles) and provides a hose barb connection for tubing. Perfect for DIY…
I needed some quick Canadian Forces tanks in 15mm 1/100 scale so whipped these up- enjoy 2019-06-25- fixed slight turret distortion (it was a bit too squat lol) Print instructions Unassociated tags: 1/100 Category: Vehicles
Small Wiring Junction box 22x15mm to fit 2.5A terminal strip with two connections.
I wanted the lidar unit of a DJI focus pro set underneed just in front of the matte box of my video rig. For a 15mm rod rig. With 60mm spacing between rods. (Smallrig shoulder rig for example) Uses m3 hardware: 2x bolt, nut and washer.…
