1 / 3
Grinding wheel angle check
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Grinding wheel angle check for 150mm wheels Angles: 15 deg, 20 deg, 30 deg, 45 deg, 90 deg
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 96
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Grinding wheel angle check for 150mm wheels (6inch)
Angles:
15 deg, 20 deg, 30 deg, 45 deg, 90 deg
Angles are set by using the flat side, and pressing the curve to the grinding wheel.
For the 90 deg angle, place the measuring tool on it's bottom face, the 90 side wall has the same 150mm diameter curvature.
Tool thicknes taken into account is 2mm.
If a thicker tool is used, then a slightly lower angle is being cut.
Slicing: advised to have a seam on the 1 side that is unused (opposite the 90deg side), see picture.