1 / 6
sledgehammer holder for Multiboard
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I have updated the design, so the holder is sleeker without cutting down on ability hold heavy hammers.
Sturdy hammer/sledgehammer holder for Multiboard is made to hold a 1.5 kg (3.3 pounds) hammer. (it will properly be able to hold a hole lot more than 1.5 kg)
Size from edge to “fingers” aka. where the hammer rests:
- v1 + v2 = 46 mm
- v3 = 42
Mounting
To mount the holder on Multiboard you need the following for mounting
- 2 pcs - Heavy Weight-Bearing Hook Snap (1 for each holder)
- 2 pcs - Moderate Weight-Bearing Snap (1 for each holder)
- 4 pcs - Small Thread - Multipoint (2 for each holder)
I recommend using the following print settings (or use the attached 3mf file):
- walls: 3 loops
- top and buttom shell thickness: 1 mm
- infill: 3d honeycomb, 15%
- support top interface spacing: 0.1 mm
The Multiboard is created by Jonathan from Keep Making - www.multiboard.io