Audi S1 Quattro HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
HueForge of the iconic Audi S1 Quattro
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 44
- Makes
- 0
- Views
- 222
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 225x162.2mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PETG GEEETECH BLACK Transmission Distance: 0.5
PETG Sunlu Red Transmission Distance: 11
PETG Giantarm White Transmission Distance: 11
PETG GEETECH White Transmission Distance: 8.9
This print uses 4 unique filaments
Swap Instructions:
Start with BLACK
At layer #10 (0.88mm) swap to Red
At layer #14 (1.2mm) swap to White
At layer #18 (1.52mm) swap to White for the rest.
The results may very depending on the Transmission Distance of your Filaments