ZiNc Leaf Blaster - Case for Pubmote
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3d printed case for the Pubmote project, a VESC onewheel tilt remote
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 78
- Makes
- 0
- Views
- 378
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
3d printed case for the Pubmote project, a VESC onewheel tilt remote. Thanks to Markoblaster for designing the original. This version fixes a handful of flaws in the original design and introduces some quality-of-life improvements.
Hardware Requirements
Battery
3 x M3x20 countersunk screws
2 x M3x8 cap head screws
6 x 1.27mm header pins
1 x 10k Ohm resistor (TBD)
Printing Instructions
Print in your preferred material with as much infill as you like, but here are some print settings recommendations:
30%-50% infill, so the large, flat areas are sturdy
Lid and thumbsticks should be printed in TPU
All other parts should be printed in a solid material such as PETG/PLA