1 / 6
Ender 5 ZeroG Mercury One Dual-Z — image 1
1 / 6

Ender 5 ZeroG Mercury One Dual-Z

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Simple dual Z mod that uses existing hardware as much as possible, for a stable bed

Rating
5 / 5
Likes
33
Downloads
94
Makes
1
Views
883
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution

Basically, all you will need is a second matching lead screw, motor, mount and coupler. I recommend buying two leadscrews together, as I had a hard time finding one that matched the ender 5 leadscrew.

 

I had several ideas to replace the floppy bed assembly for a dual leadscrew solution. After a few complicated ideas, I felt I'd be able to get a good result with the existing hardware if I just added a leadscrew without the linear rails.
Seems to work great so far, even now with a much-upgraded motion system thrashing about.

The bed support and the leadscrew bracket are fastened with M4 screws tapped into the plate. This is the most rigid solution. I can't find the source for the bed support, but you might find you don't need it - I already had them fitted so I'll keep them on.


https://www.thingiverse.com/thing:4096705


The T8 leadscrew nuts are at exactly the same height, to make alignment easy.

Printing:  I didn't use supports but used bridging at the underside of the T8 nut. This is why the holes have a .2mm layer closing them off. Just ram a screw driver or drill bit through after printing.

Tags