SelfIY Ring - ESPHome based 3D printable selfie ring by Nerdiy.de
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an ESPHome based selfie ring that can be integrated into HomeAssistant. It has touch control and USB-C supply.
- Rating
- 0 / 5
- Likes
- 3
- Makes
- 0
- Views
- 49
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Standard Digital File License
The SelfIY Ring is a selfie ring that can be produced using a 3D printer.
In addition to the 3D-printed components, it is based on a WS2812 (or similar) LED strip and a XIAO ESP32-S3. The SelfIY Ring is powered via a USB-C connection and can be integrated and controlled through HomeAssistant thanks to the ESPHome-based firmware.
The color and brightness of the LEDs can be adjusted either through HomeAssistant or via the integrated web server. Additionally, the brightness can be controlled using the two built-in touch sensor buttons.
The SelfIY Ring can be mounted on a standard tripod thread (1/4"). Cameras can also be attached to the ring itself using a tripod thread (1/4").