1 / 11
Guitar Strap Locking Clip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A locking clip that slips onto a guitar strap button and stops the strap from coming off
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 127
- Makes
- 0
- Views
- 419
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
DT3D_PRINT GUITAR STRAP LOCKING CLIP
This is my guitar strap locking clip
The clip allows you to lock the guitar shoulder straps prone to falling and coming off.
**WARNING….DO NOT SWING GUITAR AROUND YOUR NECK WITH THESE CLIPS ON :)**
This clip will lock the strap in place & is easy to install and remove.
ASSEMBLY
- Just align the strap button with the round opening on the underside, press down and forward until the clip locks in place
- To remove, Just prise up the front of the clip and it should release.
- The clip will fit on most guitars
- Clips work better on thin straps, but will work on thick straps.
PRINT SETTINGS
- POSITION AS ABOVE
- AUTO TREE SUPPORTS
- 0.2 LAYER HEIGHT
- 4 WALL/LOOPS
- BRIM
- MAKE SURE YOUR LAYER ADHESION IS ADEQUATE