DHT22 - Screwable Case/Housing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a case for the DHT22 which supports being screwed or glued at walls.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 59
- Makes
- 0
- Views
- 209
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Standard Digital File License
This case is for the commercially available presoldered DHT22 sensors. You can find such sensors on AZDelivery. Sometimes they aren’t cut correctly (if you see a grooved white line on the edges); in that case they won’t fit. You can simply snap off the excess (that’s the purpose of the white line).
The model is designed for the following assembly:
- print both parts once per sensor
- insert a threaded insert in Part A
- screw or glue Part A where you need it
- insert the sensor at a slight angle and screw it down
- push on Part B
You can also use hot glue to secure the sensor if you don’t want to use threaded inserts or modify the hole, so that a standard screw holds tight without a threaded insert.
Printed with a 0.4 mm nozzle @ 0.2 mm layer height in PLA.
Happy printing!