1 / 4
Fix for Action Hot Glue Gun / Heißklebepistole / Lijmpistool — image 1
1 / 4

Fix for Action Hot Glue Gun / Heißklebepistole / Lijmpistool

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Makes the 2.99 EUR glue gun from Action usable

Rating
0 / 5
Likes
6
Downloads
26
Makes
0
Views
148
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

I found that using the cheap hot glue gun from Action is very frustrating because it doesn't grab glue sticks when pressing the trigger. This basically means the stock tool is useless. Granted, this is kind of expected at the 2.99 EUR price point.

However, this one weird trick fixes the grabber and transforms the glue gun into an actually usable tool.

My design replaces the sliding block and grab arm parts with a mechanism that grabs glue sticks. The original sliding ring was too smooth inside which meant it could never push glue sticks into the heating element.

I added teeth on the inside of the ring and increased the size of the ridges on the grab arm.

Assembly

No hardware needed, print the 2 parts and use a piece of 1.75 mm filament as the rod to connect the arm to the block.

I printed this with PLA at 0.1mm layer height on a Prusa Core One.
 

Change Log

r2: Improved version which also fits glue sticks with 11.5mm (and slightly larger) diameter 

r1: Initial version, fits the glue sticks which are sold by Action. Too small for 11.5mm sticks.

Tags