Robin Nano v3 case w/ 40mm fan mount 2020 extrusion
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Robin Nano v3 case w/ 40mm fan mount 2020 extrusion
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 19
- Makes
- 0
- Views
- 103
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
I wanted a horizontal mount a secondary MCU for Tronxy X5SA Pro build. It needed to be in the front right side so it could be hooked to a display.
Printed in PLA using Voron print specifications. Supports may be required depending on your part cooling.
Models:
There are 5 bottoms models which either have no tabs or will have 40mm long taps in 2 directions. Additionally, there is one top that will fit any of the bottoms.
Parts:
-4 x 8-12mm M3 screws can be used to fasten the board
-4 x M3x30mm screws through top into bottom
-4 x M3 nuts/locknuts for bottom
-4 to 5 x M5x10mm for tabs
-4 to 5 x hammer nut or equivalent for 2020
Optional Parts:
-40mm fan grill with M3x25mm screws to nylock nuts
**Please note that the 40mm fan will either mount to the top or the bottom with 2 screws. The top and bottom will then close the gap.
**This could be used vertically depending on use case.
**remixed from:
https://www.printables.com/model/1063039-btt-skr-14-case-w-40mm-fan-mount-2020-extrusion