1 / 4
Ubiquiti unifi OCD uacc 2U vented panel with fans — image 1
1 / 4

Ubiquiti unifi OCD uacc 2U vented panel with fans

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

add fans to your ventilation

Rating
0 / 5
Likes
6
Downloads
40
Makes
0
Views
186
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

Added some fans to a ubiquiti ocd panel. 

made three versions.

  1. with own material like 8mm m4 hexbolts and m4 x5x6 heated inserts and m3 6mm hexscrews for mounting the adapter to the OCD panel
  2. with own material as in point 1 but with an addition of a white  5mm 12v white LED with holder to indicate if fans are on 
  3. UNTESTED!! with the use of the screws that came with the OCD panel, measured the screws so it should fit the adapter but I don't know if those screws are long enough. Also the holes for the fans are smaller to use with the screws supplied with the fans I used

the fans I used are cheap 80mm fans but they are suprisingly good and quiet, for €3.. a piece.

I used some MESH panels to give it a clean look, mounted them underneath for esthetics but for maintenance and cleaning you could do it differently.

 this whole operation send me back (excluding the OCD panel) €20

I run the whole thing from an ESP32 connected to Home Assistant so the fans spin up when the temprature gets too high and adjust it accordingly. I reckon you could use every other 80mm fan and control them via the PC motherboard.

have fun!

Tags