Spray Paint/Can Holder - robust and easy to print
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spray paint/can holder that just clips on. Easy to print.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 75
- Makes
- 0
- Views
- 477
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
-- UPDATE 28.05.25 --
Added a new trigger that works better with the spray can cap that I use predominantly, as the original one was too short.
-- Description --
I split up the holder in 3 parts, making it easier to print. Both sides (outside) should be printed flat. The inside part of the handle should be printed on it's head. The trigger obviously flat too.
The dowels are pretty undersized, so they should fit and just help with the rough alignment. Add glue of your choice to assemble the model. Weld the seams if you want the connection to be more reliable.
Printed mine in PLA @ 0.5mm nozzle, 0.28mm height and with as many walls were needed to have the actual can holding part be without infill.