1 / 5
Sliding Cover for Core One MMU3 Community, STEP files provided
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A sliding cover for the pass through of the MMU3 unit into the chamber, to contain temperature und keep debrees out
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 97
- Makes
- 2
- Views
- 823
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I didn't like the fact that a large opening is on the top. Temperature would escape, and debrees of the filament cutter could fall into the build chamber, that's why I designed this cover.
- Use Structural settings, fast settings would lead to bad fitting
- Check the illustrated picture for assembly, orientation is important
- slide A-covers in from each side, then snap in the center piece in the middle, then snap in the B-covers from the top, interlocking with the center piece and overlapping with A-Covers
- I drilled 2,5mm holes in the base, and put in M3x8mm screws in directly. You could use longer screws and a nut, whatever works for you. I just did not want to reprint the base parts.
If you need other tolerances for smooth sliding, different hole for PTFE coupling or want to use a different mouting method, step files are provided as well.