Ender 3 (V2&PRO) CR Cable Guide for Direct Drive
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ender 3 (V2&PRO) and CR series extruder wires cable guide for direct drive conversion.
- Rating
- 4.828 / 5
- Likes
- 440
- Downloads
- 2,452
- Makes
- 32
- Views
- 14,829
- Reviews
- 29
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
After I convert my printer to direct drive my extruder cables were touching the Z rods. I don't like cable chains so I need a solution for cable management.
The guide has a 90 degrees angle in order to better route the wires and it is mount on the old extruder plate with 2 M3x8 screws from underneath (you could use nuts and washer but I didn't find necessary). Secure the cables with some zip ties and your are done!
Updates:
25.02.2022 v3.0 - discovered the cable guide will touch the upper left z lead screw holder and reposition the cable channel.