CFS raiser legs for K2Plus
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€11.41 – €13.95 net (excluding VAT)
For file: cfs leg for k2 plus_0.4n_0.2mm_PETG_COREONE_8h18m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €12.68 excluding VAT (range midpoint).
- Weight reported by the author
- 268 g
- Print time reported by the author
- 8.3 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
CFS raiser to use with 2020 aluminum extrusion
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 29
- Makes
- 0
- Views
- 262
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
You need to print 4 of this and use 2 X 2020 extrusion about 440mm length i drilled and tap the extrusion for M4 bolt using the hole in the leg as a guide this is printed in PETG HS using 25% infill honeycomb with 4 perimeter. it is a very strong set of legs and very rigid i used 3M double sided tape to make sure the don't slide.