Buffer Attachment for HOMCOM Bicycle Trailer [PETG]
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.67 – €2.05 net (excluding VAT)
For file: Bike Trailer Buffer Attachment_PETG.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.86 excluding VAT (range midpoint).
- Weight reported by the author
- 18 g
- Print time reported by the author
- 2.17 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Designed for the HOMCOM bike trailer I recently purchased. This functional print it to protect its paint.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 42
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Share Alike
I recently purchased a bike trailer (also known as fietskar/ Lastenanhänger). Its frame is made of 20 mm diameter metal pipes. (EAN: 4251774961240)
I designed this “clamp and insert” buffer attachment to protect the frame paint when I set it in upright position to retract the coupling rod. I also reused two plastic pipe end caps that were part of packaging material. Also works well if the trailer accidentally bumps into a wall when you use the detached trailer for other purposes.
Print with PETG with usual PETG print settings.
With the provided models,
- Use frame protector rubber strips (3 mm thickness).
- Rubber bushes.
- A M6 screw and a bolt.
Or,
Remix it by yourself to suit your needs: https://www.tinkercad.com/things/1UltoGQht4y-bike-trailer-buffer-attachment