1 / 4
Creality K1C CFS Buffer Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I designed this buffer mount for my K1C to remove the need for the coupler (reduce friction). It uses existing holes.
- Rating
- 5 / 5
- Likes
- 44
- Downloads
- 225
- Makes
- 3
- Views
- 1,353
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Design Concept
I designed this buffer mount for my K1C to remove the need for the coupler (reduce friction). It uses existing holes on the rear.
Purpose
Reduce friction.
Printing Tips
I used PLA as it's outside the heated bed chamber. 15% infill.
Assembly Instructions
Once printed, fit the bracket to the printer using the two small black screws pictured (you'll have a few hanging around after fitting the upgrade kit). Then secure the buffer to the bracket using two M3 x 8mm bolts. You might need to run a 3.0mm tap to clear the threads post-print.