1 / 1
Artme3D MK3S Pellet Loading Tool
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A part printed to make loading your MK4S with material a little more pleasant.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 14
- Makes
- 0
- Views
- 225
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
A helpful part that makes loading the Artme3D MK3S hopper a lot easier.
- Remove the lid from your hopper and place the loading tool over the extruder drive gearbox.
- Pour pellets into the loading tool from the front until you get a small mound of pellets that come up to the front of the loading tool.
- Use your finger to even out the pellets.
- Remove the loader and reinstall the hopper lid.
---
The model has an embedded support structure. Remove this from the underside of the finished print.