1 / 1
44511‑27E00 - Suzuki GS500 tank vibration damper + lower bushings — image 1

44511‑27E00 - Suzuki GS500 tank vibration damper + lower bushings

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Main + Secondary tank vibration dampers for the Suzuki GS500

Rating
0 / 5
Likes
4
Downloads
21
Makes
0
Views
203
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

According to ChatGPT, the 44511‑27E00 or my variant main_vibration_damper should fit:

Suzuki GS500 (naked) - GS500 K1 -K6 (2001–2006) 

Suzuki GS500F (faired) - Models K4, K5, K6, K7, K8, K9 (2004–2009) 

Suzuki Bandit Range - Includes Bandit 600 & 1200 (e.g., GSF600/1200) from 1997 through the 2000s

My model is a gs500f from 2007 and I specifically designed the models to fit my bike, it might be a bit finicky or not fit as nicely in the end for you. Even I had to push the tank quite hard and then push the bracket where the screws go in to be able to get them in.


I printed the parts from TPU 95A. The tank has some small vibration but it's inaudible, miles better than hitting the frame and rattling. I would choose a 85A if I had the possibility to print it, to limit this vibration a bit more. I recommend using some loctite on the bolts that go through the bushings and screw into the tank.

In the end I have a really small gap where the rubber lip of the tank was. I didn't notice it rattling while riding but I included a rattle fixer similar to that stock rubber lip just in case. You can scale it on the Z axis to fit your needs.

Good luck printing them and enjoy all the rattle free, raging 47hp of the GS :)

 

Tags