Magpul Grip Insert Hex Driver and Cr2032
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Moe grip insert that will hold a single 1/4" drive bit as well as two Cr2032 batteries.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 43
- Makes
- 0
- Views
- 264
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I made this insert for the Magpul MOE grips as I wanted quick access to a long flat blade screw driver to adjust Bootleg Adjustable BCGs. It also will store two CR2032 batteries. It was specifically developed to use these long SL5 flat blade bits https://www.ebay.com/itm/156150263812 but can be used to hold other ¼' drive bits. This is designed specifically to hold the bits tightly to help reduce deformation in the material when having to use more torque as well as to reduce noise when moving around. Because these bits are a bit (pardon the pun) longer than many other bits I have also included a hex insert that is 10mm tall. This insert can be scaled for height depending on the users needs for their specific bit.
I recommend using either PETG or a Non CF Nylon for the main body. This will help with temperature resistance against deformation as well to give the clip portion flexibility and not produce a stress crack after multiple insertion/disinsertions.
I also recommend a high wall count if not an almost solid infill to help with deformation of the socket and sides when batteries are not present. When the batteries are not installed the sides can deform if you are grabbing those sides while using the tool.