Tiny LED Battery Voltage Checker
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made these to make voltage level check easier and faster.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 169
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Made these to make voltage level check easier and faster. They weight ~0.6g so maybe not for tiny whoop batteries but for larger models I'll likely put these on most batteries as they are really cheap.
I designed an inline button so they only check the voltage when the button is pressed. The case is then glued in place with a few drops of CA. It is a little tricky to put together.
The ones I have measure 1S so I connect it either to poles directly on DIY batteries or from two of the balance leads. It doesn't really matter which ones as long as they're next to each other.
If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.
https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6
