CORE One Chamber Thermistor Protector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Keep your chamber thermistor protected from unwanted flexing!
- Rating
- 5 / 5
- Likes
- 59
- Downloads
- 182
- Makes
- 9
- Views
- 720
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Hello! If you've got a COREBOXX or similar MMU setup, your PTFE tube from the MMU selector to the nozzle may be pushing against the chamber thermistor. I'm afraid this could cause problems over time, so I did a quick search for a protector, but nobody made any. So I made one myself!
It's just a simple cage that bolts in place using the two upper-middle screws for the chamber exhaust fast. You may need to switch to longer screws. 35mm is what I swapped to.
This may impact temperature readings, but I'd expect it to not be a problem.
A brim is recommended, as is printing with a structural profile to help the smaller details print nicely. (It's a 10-minute print with .15mm structural) As well, this should definitely be printed with a high temp material such as ABS/ASA, PC, Nylon, etc.
Included is the Fusion360 file, to help with remixing ^-^
Thanks for viewing!