1 / 4
Capra Straps
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Printing Instructions:
All of these straps are optimized for 95a shore hardness TPU
The simplest explanation of the print settings is that FOR THE CENTER SECTION ONLY you need to set the top and bottom layer count to 0, set the wall count to 1, and the infill pattern to the desired mesh. Below are some pictures of these settings in various slicers.
Orca Slicer:
