SMC 1600 mAh 6S Li-Po Battery Protection Cage
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cage for protecting SMC 1600 mAh 6S batteries. Specifically made for GEPRC Vapor D5 but would work with other drones.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 24
- Makes
- 0
- Views
- 112
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
I made this cage to be used with GEPRC Vapor D5 specifically but if you are already routing the XT-60 cable to the side it would work with most drones. Tried to find a good balance of durability and weight (it's about 15.7 grams). The project of the model I have is easily editable so if there is a specific dimension you are looking for feel free to tell me (or you can edit it yourself using Onshape and the link at the bottom).
I'm using the one I printed with PLA currently but I'm gonna try TPU as well. Let me know if you have another recommendation or your experience with the material if you print it and use it heavily.
You have my permission to improve the model, share it, produce it, sell it. Just don't re-upload it without any changes (basically don't have malicious intent). I added the SolidWorks and STEP files so that you can edit easier. If you are using Onshape, you can copy and edit the entire project using the link below.