1 / 8
CWWK X86-P5 NAS board case - 4xNVME + 2xSSD — image 1
1 / 8

CWWK X86-P5 NAS board case - 4xNVME + 2xSSD

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A case for CWWK x86-P5 which has space for 2 SSDs

Rating
0 / 5
Likes
1
Downloads
25
Makes
0
Views
435
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

The fan is a regular 120mm PC fan. The shield is for the board with red USB ports and FPC cable (rev 1.1). I might upload the shield for the board with blue ports as well. No promises.

The shield is separate from the main body. It can be attached with super glue. Glue it after closing the top lid to make sure the case is in shape.

I would recommend to print the “bracket” which screws to the heatsink with PETG or ABS/ASA. I have a feeling PLA would be fine too because it is in front of the fan. Even if the bracket warps, the heatsink should be able to rest on top of the fan.

I printed everything with ABS filament which was a bit wet hence the bad quality. I didn't bother re-printing.

First screw the bracket to the heatsink, then screw the bracket on top of the fan (the fan will blow air to the heatsink), then put the whole thing inside the case and screw the fan to the case. I will put some photos showing the way things fit together.

***

Hardware needed:

Super glue for the shield

2x M3x6 screws for each SSD

4x M3x6 screws with insets for the lid

4x Fan screws (I think those are M5)

4x M2x6 screws to secure the heatsink to the bracket

***

Shield is taken from https://www.printables.com/model/934325-cwwk-x86-p5-devboard-case

And fan grill is taken from https://www.printables.com/model/1096961-high-efficiency-noctua-120mm-fan-grill

 

Tags