574 models
This is a 3D printed model of the P-51D Mustang from WWII. It features the fin offset and the wing washout of the original P-51. The entire model can be printed without the use of supports. I printed the entire model in PLA. This model…
The photo shows the original doorbell and base plate. The hooks of the base plate get easily broken off when replacing the battery. As a 3d model, this base plate is difficult to print in one complete part. Therefore I made it in 3 parts:…
(10/1/23) Overhauled the design to be a better fit with a wide range of magazine tolerances. Designed around genuine HK, MKE, Zenith/KCI stamped magazines. Untested with polymer magazines. A bit of grease in the cartridge channel can make…
Two variations of a grip I designed for the Retroid Pocket 5, featuring Nub technology. STLs for straight printing as is, but STEP files are also available if you want to make changes to better suit your needs. The Full Width grip is a…
Tactical MP5 Gnome – Guardian of the Garden This ain't your average garden gnome. Fully kitted out with night vision goggles and gripping an MP5 like he's on a midnight recon mission, this tactical gnome is ready to defend your…
The CAD can be found from https://github.com/eamars/PrintableThrowLevers/tree/main
I love uploading car parts. Great fun altogether. Maybe some day it will be possible to download a complete Toyota Hilux 1:1 scale Hilux and print it from metal. Make sure you print the bottom part on it's side, I have included some 0.4mm…
its mp5-sd for DUMMY 13 print with support
Modbutton will pressure fit into mount and whole assembly is zip tied to cocking tube.
Direct drive Phaetus Taichi and EBB CAN 42 mount for Sapphire plus SP-5. I used Sailfin extruders, since they have smallest footprint. Files can be found here . You will need two of them, normal and mirrored. Two pieces of bowden are…
I made this part because the screen and select fire switch are only required for the solenoid version of the NP5 gryphon and there were no part variants that did not include spaces for these unnecessary parts. THIS IS FOR THE MANUAL…
A wall mount for the Arris VIP5202 set-top box, known as the former (2021) set-top box of KPN, (4K version, not sure if this matters). Holes for the screws are 3mm in diameter, with a 4mm diameter drop to hide to top of the screws. The…
Print it and put it in place of the guns trigger
A home for your Ryobi HP54L 4v Screwdriver and its to best bit buddies. They can all now hang out on a multiboard near you.
I made the railed version first and thought it might be cool to do an Aimpoint T1/2 footprint version (a bit like the real 30mm Aimpoint mounts KAC made) so I designed my own. Designed to fit on the VFC KAC MP5 rail fitted to a WE MP5,…
Scatt optical holder for Walther GSP 500. Fusion360 design file included.
I made a mistake when working with the great LaserPecker LP5 and launching a project without remove the laser lens cover… and the disaster happened :). If you lost your cover, by accident or no :) like me, or to have a replacement you can…
Just an easy to print model with snap fits for the usb and psu module.
I needed a mask to scan half-frame film and as these items are getting more and more expensive and rare, I decided to design one myself. The design was based on the original mask 135. The window in the mask is exactly the nominal size of…
This adapts a 80mm fan into the 40mm hole which has the nozzle exhaust chamber. I haven't got it working as the fan it's replacing is 24v and I don't know how to get 12v power to the fan. Check my other model which is the nozzle exhaust:…
A replacement nozzle cooling system with a duct to fit an 80mm fan. Haven't tried it yet as I'm looking for a way to convert 24v to 12v for the fan. Check out my other model for the fan Duct:…
This is a work in progress, i might need some help with the collector rings for the chopper motor.
A box for the high voltage probe. The key feature is the cutaway at the bottom. These probes have cables coming out of both ends, which makes it not a good fit for a standard box. Updated design which has holsters for probes, oscilloscope…
cp400 mount for mp512 sights Windage ajustments from mp512 sight. Elevation ajustments is jank. Just position the sights accordingly. No clicks. But is works. Print on the side with tree supports.
This is a hinge part replacement for the Body Glove case for the Z Flip5 phone. The chamfer and such don't line up perfectly with the phone case, but it's a pretty good fit and it is functional. I printed it with PLA at 15% infill.
I needed a power bank case for my salvaged 18650 batteries. The module I used is in the link below. 5V 2A Charge-Discharge Integrated Module Type-C Input Compatible With 4.2V lithium Battery,…
Desktop Charger for the Sonim XP5800. The openings for the terminal contacts must be widened with a file to give the terminals free space to slide back and forward. I glewed the bottom part of terminals into place with supperglue. This…
A shortened stock tube extension for use with an existing G&G stock tube extension.
Simple elastomer mod for cammus cp5 pedals. Damper mount PETG: 0.24 height Damper TPU (worked best for me, if u find better options let me know): 5 walls 5 bottom layers 5 top layers 50% gyroid infill Assembly: Quite hard to push it in, i…
A simple MP5 wall mount since I couldn't find one available for free. Best printed in the orientation it imports in with supports (on its side). I RECCOMEND YOU PRINT IN A LOW CREEP MATERIAL LIKE ABS (I PRINTED IN ASA-CF) YMMV IF YOU USE…
Auf der Suche nach einer Wandhalterung für unseren Staubsauger bin ich nicht fündig geworden so habe ich mir eine eigene gebastelt. Ich habe sie in PLA Schwarz gedrückt ( empfehle aber ASA ) Wandstärke. 3 Infill. 100% Support. Ja (…
This is a simple desk stand and battery holder for my HUZZAH Feather ESP8266 + Adafruit NeoPixel FeatherWing 4x8 (NeoMatrix) scrolling text sign. It includes a holder sized for a PKCELL LP503035 LiPo battery (3.4V, 500mAh) so the sign can…
The original model is of the MP5SD - I attempted to make it to scale. I have updated the model to version 2 - this has a slightly longer suppressor, the option of a holographic sight vs a 2x scope, picatinny rails, vertical foregrip,…
This is a Multiboard holder for a Ledlenser flashlight model P5R. It uses a single press-fit Multiboard peg. I don't know if other Ledlenser models will work with this, but the handle diameter is 22mm for reference. Prints in place…
A handguard made to take a Novritsch Scopecam or ClipCam. It will fit any MP5/HK53 that uses real steel specs. Model is already oriented for optimal printing. I included a model with integrated supports just place it on your printer and…
This is a portable stand to hold an air water/oil separator. Specifically designed to hold my model mp516803av regulator while air brushing. Having used supports for the 35mm opening filing was necessary to provide clearance for my…
Replaces the "Right Mech Cover" and "Left Mech Cover". They don't sit flush with the grip otherwise.
Longer (+3mm from the original) version for additional spring contact plates. Improved battery mount contacts: example or ozon ip5306: aliexpress or ozon battery: ozon
Thy is my original first design of the Compensator for Umarex TP 50 Gen 2 (HDP 50). You need to have tunning barell installed, you insert it over the thread. Compensator itself is locked in place with 2x M3x6 grub screws. I printed the…
These pins will help keep the stock in place, with some tight-ish fitting.
For MTD P51 lawnmower or other types of lawnmowers or other garden machines equipped with MTD engines, made based on the
Quick and easy adapter solution. Since the mount is quite small, use a tough filament for printing (ABS, PC, or similar). Also, make sure your printer is properly calibrated for accurate scaling. If the filter doesn’t screw in smoothly,…
This uses the same 6mm or 1/4" rods as the original design as well as the same locking mechanism and hardware, just shrunken down a smigde to fit under the reinforcement plates on a K receiver. The brace is not original to Daikon's design…
Grip plug that holds a locking piece for the MP5 Navy Grips. Print in TPU otherwise tolerances will be too tight to fit. Was unable to export an STL file that contained the negative volumes underneath that allow for your fingers to grip…
A motor mount for the Tower Hobbies MK1 P51 Mustang. (This is for the older/original version of the Tower Hobbies P51 Mustang, not any of the most recent versions). Depending on your print settings, you'll be between 28 and 40 grams…
Simple two part adapter fitting into the GP5 masks. You adjust the admitted airflow from full to almost nothing by screwing in and out the inner valve, that frees more or fewer air inlets. Very fine regulation. Always play safe, sane and…
I really like the look of these LED Matrix Panels. With the addition of the super simple Adafruit Matrix Portal interface board they are easy to program and display. But the backs of these panels are completely exposed and the Matrix…
(10/1/23) Overhauled the design to be a better fit with a wide range of magazine tolerances. Designed around genuine HK, MKE, Zenith/KCI stamped magazines. Untested with polymer magazines. A bit of grease in the cartridge channel can make…
Hey friends! This model was one of my first ever attempts at 3D modeling. For a better solution, check out this model . For a great model to add even more drives in the optical bay, check out this model . I have created a hard drive cage…
just took the original model and made the springs a little taller, fits my plate carrier little better + 1 more mag
The MHP50 is not tall enough for omnifixo's clamp to stay flat. If you use Omnifixo clamps without the base, the boards are slightly tilted causing uneven heating or sometimes, no heating. This base fixes that issue. The base has indents…
Empty Chamber Indicator / Safety Flag for MP5 platform. Designed so you can close the bolt on the flag and the receiver will not cut the flag's arm off. Hole included for attaching a lanyard, elastic, or keychain. REMOVE BEFORE PEW PEW!…
A couple of years ago I bought an np5 gryphon secondhand, and wanted to design something to make mine a little different from the other ones out there. 2 years later and I finally got around to doing it! The NP5SD replaces several parts…
A home for your Ryobi HP54L 4v Screwdriver and its to best bit buddies. They can all now hang out on a multiboard near you.
I made the railed version first and thought it might be cool to do an Aimpoint T1/2 footprint version (a bit like the real 30mm Aimpoint mounts KAC made) so I designed my own. Designed to fit on the VFC KAC MP5 rail fitted to a WE MP5,…
10 round speedloader for both standard metal and polymer magazines, and an original length version for polymer magazines. Also, an added “Pusher” for easier sliding of rounds. The pusher works for both long and short versions. I…
ruler to messure height of screws or other objects with volume
It used to be possible to buy leaf grabbers that were slightly angled at the head (I think Gardman made them, but they've changed the design). That way you could pick up leaves that were a little further in front of you rather than right…
Something I made for fun and functional to use. Fits perfectly over the Forge Motorsport FMCAP5 oil filler cap. The cap is a universal fit for multitude of cars.
Better than no slot bracket, this one does a reasonable job of filling the empty space, in my old 486 machine.
I designed these to get a more comfortable angle on the CP5 pedals from Cammus when mounted in a wheel stand. I found the angle far to shallow for use in a wheel stand. I have provided 3 total variants, though only 2 really. One is a 7…
Here's a purpose-designed bracket to interface with the spring-loaded optical drive pins to add hard drives with some cooling. The other designs were very restrictive and I didn't even try them for fear that the drives would overheat.…
Working on a modified E3V2 with AWD Y axis and designed a case for the Mellow Fly DP5 MCU since it uses 5 stepper drivers and is a very cheap and accessible board. The case mounts in the stock orientation with the screws on the front plus…
Update! Due to popular demand i have released the step files for easier modification. Parts: Psu module: https://s.click.aliexpress.com/e/_oDMk7jQ USB-C pd board: https://s.click.aliexpress.com/e/_oDtVUnE Banana plugs:…
Remix of 1D_Design's "Bottom Bracket Tool 44mm 16T for (Bafang, G510, Ultra)" so it fits the Magene lock ring adapter
This is a case I designed in order to mount multiple WaveShare P5 64x32 panels on the wall. The case is assembled using M3 Screws. You need the Pi and Non-Pi sides for one panel and then a pair of middle pieces for every additional panel.…
This is as near one to one as I could get to the real OTTO P5-1 switch including switch travel and force however some dimensions were not in the datasheet. this was designed to be printed in resin and is almost guaranteed not work with…
This allows a damaged MP5 sliding stock disc to be replaced, as they are prone to the “nubs” snapping off through normal wear and tear. I designed this and went through several iterations to ensure it worked correctly, resulting in…
A remix of an existing model, designed to marry up to the body of the Classic Army MP5 and limit wobble of the handguard
Scatt optical holder for Walther GSP 500. Fusion360 design file included.
PTEG gedruckt 8x M5 Einschmeltzgewinde 8x M5x10 Schrauben 1x M16 Anbauverschraubung Kabel und Stecker
!!! IMPORTANT NOTE !!! This mod requires you to disconnect or (recommended) remove the hall-effect sensor which detects if the front cover is attached. This disables a security feature and you also have to enable the “Free Mode” option in…
I made a mistake when working with the great LaserPecker LP5 and launching a project without remove the laser lens cover… and the disaster happened :). If you lost your cover, by accident or no :) like me, or to have a replacement you can…
This is a remix of Ryan Kelly's design. I made it taller and added clips to make releasing the saw easier.
This model simply makes the OG body printable in place, and adds ventilation holes. Click HERE to download the new model, which features a completely re-designed leg system, adds features and fixes issues + is now is completely print in…
With this base you can use the same mod created by LMaker for the kp3s on the kp5l. You don't need any additional screws, just replace the original base of the kp5l and mount it. To assemble the X tension band, you will need 2X M4 nuts .…
This is designed to sit atop the original case design by @tn00364361_495827. CWWK X86-P5 Devboard Case by tn00364361 | Download free STL model | Printables.com I didn't have the required screws for that case, so I whipped up something…
I don't have such a frame so I can't test the mount. I hope it fits! There are two versions. One with an angle of 25deg and the other one with an angle of 30deg.
Look ma, no overhangs! I love the original model, but it was missing a few design elements which make printing a lot easier - so here's my take! All STL files require no supports, and are pre-orientateded. Highly recommend turning on…
Two Trees SP5 (High Speed upgrade) - Accelerometer + Probe mount ADXL345 accelerometer SN08-N Probe or BTT Eddy ( I couldn't get the Eddy to work ) The hot end covers will need to be removed
After three of the four hub caps decided to hit the road… there was only one things to do. These hub caps / wheel center covers fit a the MB Wheels brand Legacy model 16", 8-lug wheel. Not sure if they fit the 5-lug or 6-lug models in the…
Update 2025-10-14: Removed the remix link to glgr's Curved MP5 magazine . My mag has grown different in every way and is no longer based on his mag design. A remix link no longer made sense. Fitment is based on Cyma's metal-shell AEG…
This is a wall mount I designed for the RC Volantex 500mm P51D. It's printed in 2 pieces and connected together by a single M3 screw. The large tab under the tail wheel support is meant to fit a 5lb command strip. Printed with PLA.
A frame for two Adafruit 32x64 P5 RGB LED Matrices , controlled by the Adafruit RGB Matrix Hat . Wanted the frame to stand on it's own, so added two feet. The frame holes are M3 and Raspi standoff holes M2.5. Tolerances are a bit tight,…
I got this micrometer at an auction with several other tools. Then discovered it did not have a cover for the battery compartment. Kind of a pain having to use one finger to hold the battery in place every time I need to measure…
I made this for camping so I can easily hag it from a hook on my tent ceiling. It turns out its usefull in many situations when the flip is folded. Print settings Nozzle size ......................... 0.4 mm Layer height…
Just an easy to print model with snap fits for the usb and psu module.
2.5" Drive HDD / SSD Laptop Drive Caddy Disk Tray Bracket for Lenovo ThinkPad. Compatible Models: For Thinkpad T470 T480 T570, For Thinkpad P50 P51 P51S, For Thinkpad P70 P71 P72, For Thinkpad E460(NOT E470)， For Thinkpad E480 E485 R480,…
Print settings: Printer: Creality Ender-3 V3 Slicer: Cura 5.8.1 Filament: PrimaValue PLA+ White Resolution: Standard Quality - 0.2mm Strength: Infill Density: 10% Infill Pattern: Cubic Shell thickness: 1mm; 1mm Support: Normal Additional…
Foreword : Do this at your own risk, LiPo's can be spicy : ) Note that this case is designed specifically for 5x18300 cells and the IP5310 charge controller! I hate seeing useful electronics go in the trash so I collected several…
Originally published here: Motorola One Vision / P50 xt1970 case by tato_713 - Thingiverse This is the case for the Motorola One Vision ; for the regular Motorola One visit this . Some of the models are designed for rigid materials and…
Simple mount for the YS-AP50L bluetooth amp and 4 wago 221's I used it as a cheaper alternative to the nobsound. The orginal standoff were used as inserts to mount it.
I had downloaded the long throttle plate for the P1000 pedals from this post here: https://makerworld.com/en/models/456344#profileId-364175 and I wanted to make a brake pedal that matched. I have the Simagic P500 pedals, and the mounting…
