SpinKnuckle Leverless Controller Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Updated model of my leverless hitbox design. Uses arcade style push buttons and meant to be lightweight and tool-less
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 28
- Makes
- 0
- Views
- 288
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A newer attempt at my leverless acade stick. Uses actual slim base push buttons 24mm and 30mm (purchased separately; I recommend something like the ST-L2 from Aliexpress). Wiring can be a mess, I recommend NOT using a standard wiring harness and custom wiring your setup and cutting to actual length to make it fit perfectly. Fits most PCBs but I designed it for a Picopi so other things might not fit. I designed it to be screw-less friction fit, so there are notches at the corner for the semi-tool-less access using a coin or a strong finger nail to pop open the enclosure. The entire enclosure is also sloped for comfort. If using on table top, recommended adding anti slip grip tape/mat to bottom.
You'll need at least the following:
- 17x - 24mm (low depth push buttons, 11mm or shallower)
- 01x - 30mm (low depth push button, 11mm or shallower)
- 01x - PicoPi or equivalent fightstick pcb (not tested for larger pcbs could possibly work or modded to fit)
- optional grommet for cable outlet (will design cover hole at later point)
I'll try to keep this post updated as frequent as I can and update with design changes from users. Next update will be Mixbox design with WASD and additional buton layouts.