Snap-on Lens Hood & Cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Scalable Lens Hood.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 36
- Makes
- 1
- Views
- 225
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
PRINTING
If you know the filter size of your lens, just add 2 mm. Otherwise measure the outer diameter of the front of your camera lens.
If your camera lens has a outer diameter of 48 mm, no rescaling in your slicer is necessary.
Otherwise rescale - only X- and Y-axis - according to the equasion Rescale = 100*(Yourdiameter+0.1/48.1).
For instance:
48 mm diameter = 100
51 mm diameter = 106.24
54 mm diameter = 112.47
57 mm diameter = 118.71
I printed the Lens Hood with PLA, 0.2 mm layer height. Printing with support is advised.
ASSEMBLY
Place the Spring Insert into the inside of the Lens Hood.
The snap-on Lens Hood Cap is optional.