1 / 7
Low Support for Creality Display (K1 / K1 MAX / K1C / K1SE) — image 1
1 / 7

Low Support for Creality Display (K1 / K1 MAX / K1C / K1SE)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The adapter model for moving the display to a lower position. For a door without a cutout.

Rating
0 / 5
Likes
18
Downloads
87
Makes
0
Views
841
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

The adapter model for moving the display to a lower position. For those who make a door on the K1SE or want to replace it with a door without a cutout (other K1 series).
After the modification, you will only have 6 mm between the floor and the display. If you are not satisfied with this, you can make boost pads or other legs for the printer (look for models on the website).
The best position of the part to print is in the photos. Hand-drawn organic supports are recommended to reduce time and material. It's recommended to set 3 perimeters and check in the table slicing so that the hooks are filled only with the perimeter lines.

Tags