Prusa CORE One Swing Arm Left Cable/PTFE Bracket with rubber buffer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Prusa CORE One Swing Arm Left Cable/PTFE Bracket with rubber buffer for noise reduction
- Rating
- 5 / 5
- Likes
- 37
- Downloads
- 163
- Makes
- 4
- Views
- 1,127
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Prusa CORE One Left Swing Arm Cable/PTFE Bracket with self adhesive rubber buffer for noise reduction.
This improvement belongs mainly to the users of the swing arm brackets.
When the Nextruder is moving along the Y-axis, the swing arm sometimes touches the back wall, causing a noise. If you dont like this hitting noise, use the bracket with the bumper at the left swing arm position.
The rubber buffer sits in a small frame so that it does not drop out when printing with a heated chamber.
You need one 8x3mm self-adhesive rubber buffer (sample)
Printing recommendation:
Filament PETG, 0.4 Nozzle, 0.2mm Structural, 100% Infill, no supports
Assembling:
Attach the rubber buffer to the backside of the bracket, see picture below:
For more information, have a look at the original model.