Prusa CORE One Swing Arm Left Cable/PTFE Bracket with rubber buffer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prusa CORE One Swing Arm Left Cable/PTFE Bracket with rubber buffer for noise reduction
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 163
- Wydruki
- 4
- Wyświetlenia
- 1122
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Prusa CORE One Left Swing Arm Cable/PTFE Bracket with self adhesive rubber buffer for noise reduction.
This improvement belongs mainly to the users of the swing arm brackets.
When the Nextruder is moving along the Y-axis, the swing arm sometimes touches the back wall, causing a noise. If you dont like this hitting noise, use the bracket with the bumper at the left swing arm position.
The rubber buffer sits in a small frame so that it does not drop out when printing with a heated chamber.
You need one 8x3mm self-adhesive rubber buffer (sample)
Printing recommendation:
Filament PETG, 0.4 Nozzle, 0.2mm Structural, 100% Infill, no supports
Assembling:
Attach the rubber buffer to the backside of the bracket, see picture below:
For more information, have a look at the original model.