camping caravan bumper clip mount knaus eifelland 350
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement for the original plastic mount for the bumper of a Knaus Eifelland 350 that centers the screws.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 101
- Makes
- 0
- Views
- 341
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed this mounting parts on my Bambu Lab P1S with the following settings:
Material: ASA from Bambu Lab in Grey
Nozzle-Temp: 270°C
Bed-Temp: 100°C
Support: Yes (tree)
Nozzle: 0,4mm
Layer Height: 0,2mm
Infill: 20%
Wall Loops: 3
Bottom and Top Shell Layers: 5
Print Speed: 200mm/s
Outer Wall Speed: 150mm/s
Initial Layer Speed: 50mm/s
Fan Speed: 30%
Brim: 5mm
On our camping caravan the original mounting parts did break over the time.
This is a common issue.
I have chosen ASA because of the direct influence of the sunlight over a longer period.
And to be honest, the bambu lab gray fits almost perfectly to the original bumper parts.
I decided to slightly modify the original parts.
I added a fillet to the shaft, to reduce stress points in the model.
I also added a chamfer to the top surface to make it easier to print upside-down.
I will change over the time all the original parts. Than nobody will see a difference anymore.
UPDATE: I added a second shorter version of it, because i recognized that different versions are mounted depending on the position in the bumper.