Case for Shelly mini series (mini 1, mini 1PM, mini PM, etc...)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small box for the Shelly mini series. Easy-to-print, with secured cables and space for Wago terminals.
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 163
- Makes
- 2
- Views
- 979
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This is a remix of the original model by paedia. I used a newer version that is suitable for thicker cables, which is publishes on Thingiverse. And I added ventilation holes, because Shelly products often operate at higher temperatures. The rest has been kept the same.
Applicable for Shelly mini 1, mini 1PM, mini PM and other models from the mini series.
The cables are neatly and securely fixed with cable ties.
The reset button and the LED are accessible and visible.
Size: 80x38x20mm
For assembly, you will need:
4 pcs M3 brass inserts
4 pcs M3x6/8 mm countersunk screws
2 pcs thin cable ties
2 or 3 WAGO clamps
Recommended settings
Material: It doesn't matter, I used PET-G and ABS
Layer height: 0.2
Perimeters: 4
Infill: 20%
Infill Type: It doesn't matter, I used Gyroid
Supports: They are not necessary, but I used them “just in case”