Raspberry Pi Cam Case for a Pi Zero 2 W(H) with mounted UPS HAT (C)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.34 – €0.41 net (excluding VAT)
For file: RasPi Cam Akku Case-Cover_0.4n_0.15mm_PETG_MK4SMMU3_20m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.37 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 19.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A Raspberry Pi Cam Case for a Pi Zero 2 W(H) with mounted UPS HAT (C) (Uninterruptible Power Supply) by Waveshare.raspi
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 33
- Makes
- 0
- Views
- 313
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Raspberry Pi Camera Case for a RaspberryPi Zero 2 W(H) with mounted UPS HAT (C) (Uninterruptible Power Supply including I2C) by Waveshare.
| Settings | Value |
|---|---|
| Infill | 15% (adaptive cubic) |
| Perimeters | 4 |
| Layer Height | 0.15 mm Structural |
| Material | PETG / PLA |
| Supporting Material | only overhangs / organic |
| Comments | printed on MK4S with MMU3 FW6.2.4 |
| Ironing | no (not needed, but creates a cleaner surface) |
Feedback is welcome.
Share your makes!