1 / 5
AMPED T-Deck with 1-Watt Airbuddy Amp
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Alley Cat Plus 3 back shell modified to fit the Airbuddy 1-watt Amp, 3000mAh Lipo, charge controller and power switch.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 21
- Makes
- 0
- Views
- 408
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Remix back cover for the Alley Cat T-Deck to house a AirBuddy 1-watt amp, 3000mAh lipo, 4056 charge controller and power switch. With the addition of a cover plate, the back cover can be swapped quickly for a “stock” standard back cover or the Amped “module”.
Hardware:
- Four M2 x 6mm for power switch and AirBuddy Amp.
- Two M3 x 6mm to secure the cover plate.
- Two M3 x 16mm to attach the back panel to the AllyCat T-Deck front shell.
Suggested Print Settings
Material: PLA+ or PETG
Nozzle: 0.4mm
Extrusion Width 0.4mm
Layer Height: 0.2mm
Perimeters: 3
Infill: 20%
Top/Bottom Layers: 5
Support Material: None