Voron Turtle Purge Bucket nozzle scrub catcher with build plate stops
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I really couldn't find the exact purge bucket I wanted for my Voron 2.4 350 from LDO kit. So I made this one.
- Rating
- 5 / 5
- Likes
- 35
- Downloads
- 142
- Makes
- 2
- Views
- 942
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I am in the process of prepping the printer for Filamatrix and BoxTurtle, and I wanted a scrub brush that went up and down with the gantry and a BUCKET to catch the droppings from higher up…. Couldn't find one I liked so I made this one. My printer is a 350mm and this may or may not fit in smaller printers depending on if Klicky is there, etc.
I also wanted stops to align the PEI build sheet better/easier as I never had them, so integrated that in….
Am using this gantry mounted brush system which I like so far…. AFC-Accessories/AT_Brush/ReadMe.md at main · ArmoredTurtle/AFC-Accessories · GitHub
Will see how I like it once the other pieces are in place but working great as is. Make sure the nozzle scrub does not crash into the Stop screws… including my nozzle_scrub.cfg (rename txt to cfg) as-is for example noting it is not fully cleaned up from where I started but works fine for me.
Right now I am using Klicky, but wanted it to be ready if I decide to go to Cartographer and the silicon brush helps here.
Print settings can be Voron norms…. 0.2 layer height, 4 perimeters, 4 top/bottom layers, no supports.
Am using about (4) 6mm x 3 Magnets and about (6) 3mm x 8 SHCS along with (4) 3mm maker bar nuts.
Of course, you can mirror the parts in the slicer if you want to make a ‘right handed’ one.
