Middlefinger LED Lamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A hefty fine Lamp
- Rating
- 0 / 5
- Likes
- 28
- Downloads
- 68
- Makes
- 0
- Views
- 1,108
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- GNU General Public License v2.0
Hey there!
Here I have a small LED-Lamp for you!
You will need some diffuse 5mm LED's, thin wire, soldering components, resistors and an old USB-A cable. (Maybe a power-bank)
Just print the files with my recommended settings and press in the LED's. Press in the Lens and glue the back cover on after soldering and testing the LED's.
Use diffusers for a better light distrubution and make sure to print the lens with white material. If you only have white LED's, you can use a colored material, should work fine. (has to be at least tranlucent.
Print time is about 4,5 H.
Print Settings:
Body and Cover:
Nozzle: 0.6 (0.4)
Layers: 0.3
Infill: 20-40 %
Supports: none
Material: non transparent/translucent
Lens:
Nozzle: 0.6 (0.4)
Layers: 0.2
Infill: doesn't matter
Supports: none
Material: White PLA/PETG (or any translucent color, make sure light can travel through!)
Diffusor:
Nozzle: 0.4
Layers: 0.2
Infill: doesn't matter
Supports: none
Brim: 5mm
Material: White PLA/PETG (or any translucent color, make sure light can travel through!)