Case for Mitutoyo dial 2046F
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple case for the Mitutoyo dial 2046F.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 63
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple case for the Mitutoyo dial 2046F. It is a simple zero millimeter fit on the lid with some cut outs to make the corners fit better. I printed these 1:1 and the fit was good and the layer lines give good holding force on the lid.
Parts needed:
You will need to make a custom foam cut out. I made mine from 19mm foam. I put the dial on and marked it roughly with a pen. Then I cut out the dial shape. From the cut out I made a flat inlay to separate the dial from the bottom. For the outer size measure your print and leave some overlap for a nice tight fit. Check the images for details.
DO NOT print the foam I provided in the step file. It is only a mock-up.
Print instructions:
- recommended layer height 0,2 mm
- No supports needed
I would be happy to see some of your makes posted :)
Source files in the Alibre Atom format is available but the website does not allow the upload. If you need it send me a message.